Manuale Philips GC2860 Ferro da stiro

Manuale

ENGLISH

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benet from the support that Philips offers,

register your product at www.philips.com/welcome.

General description (Fig. 1)

A Spray nozzle

B Cap of lling opening

C Spray button 8

D Steam control

- b= Calc-Clean function

- 0 = no steam

- l = minimum steam

- ; = maximum steam

E Steam boost button \

F Auto-off light (GC2860 only)

G Mains cord

H Temperature light

I Anti-Calc tablet (GC2860/GC2840/GC2830/

GC2820 only)

Note: Anti-Calc tablet not visible from the outside.

J Type plate

K Water tank

L Temperature dial

M Soleplate

Important

Read this user manual carefully before you use the

appliance and save it for future reference.

Danger

- Never immerse the iron in water.

Warning

- Check if the voltage indicated on the appliance

corresponds to the local mains voltage before you

connect the appliance.

- Do not use the appliance if the plug, the mains cord

or the appliance itself shows visible damage, or if the

appliance has been dropped or leaks.

- If the mains cord is damaged, you must have it

replaced by Philips, a service centre authorised by

Philips or similarly qualied persons in order to avoid

a hazard.

- Never leave the appliance unattended when it is

connected to the mains.

- This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety.

- Children should be supervised to ensure that they

do not play with the appliance.

- Do not let the mains cord come into contact with

the hot soleplate of the iron.

Caution

- Only connect the appliance to an earthed wall

socket.

- Check the mains cord regularly for possible damage.

- The soleplate of the iron can become extremely hot

and may cause burns if touched.

- When you have nished ironing, when you clean the

appliance, when you ll or empty the water tank and

also when you leave the iron even for a short while:

set the steam control to position O, put the iron on

its heel and remove the mains plug from the wall

socket.

- Always place and use the iron on a stable, level and

horizontal surface.

- Do not put perfume, vinegar, starch, descaling agents,

ironing aids or other chemicals in the water tank.

- This appliance is intended for household use only.

Electromagnetic elds (EMF)

This Philips appliance complies with all standards

regarding electromagnetic elds (EMF). If handled

properly and according to the instructions in this user

manual, the appliance is safe to use based on scientic

evidence available today.

Before first use

1 Remove any sticker or protective foil from the

soleplate.

2 Let the iron heat up to maximum temperature and

pass the iron over a piece of damp cloth for several

minutes to remove any residues from the soleplate.

Preparing for use

Filling the water tank

Do not put perfume, vinegar, starch, descaling agents,

ironing aids, chemically descaled water or other

chemicals in the water tank.

1 Switch off the appliance and unplug it.

2 Set the steam control to position 0 (= no

steam) (Fig. 2).

3 Openthecapofthellingopening.

4 Tilttheironandllthewatertankuptomaximum

level under the tap (Fig. 3).

Note: Do not ll the water tank beyond the MAX indication.

Note: If the tap water in your area is very hard, we advise

you to use distilled water. Do not use chemically descaled

water.

5 Closethecapofthellingopening(‘click’).

Selecting the temperature and the steam

settings

Fabric type Temperature

setting

Steam

setting

Steam

boost

Linen MAX

&

Yes

Cotton

3

&

Yes

Wool

2

$

N.A.

Silk

1

0 N.A.

Synthetic fabrics

(e.g. Acrylic,

nylon, polyamide,

polyester).

1

0 N.A.

- Check the laundry care label for the required ironing

temperature:

If you do not know what kind or kinds of fabric an article

is made of, determine the right ironing temperature by

ironing a part that will not be visible when you wear or

use the article.

Silk, woollen and synthetic materials: iron the reverse side

of the fabric to prevent shiny patches. Avoid using the

spray function to prevent stains.

1 To set the appropriate ironing temperature, turn

the temperature dial to the appropriate position

(see‘Temperatureandsteamsettingstable’)(Fig.4).

2 Set the appropriate steam setting (see

‘Temperatureandsteamsettingstable’).

Note: Make sure that the steam setting you select is suitable

for the set ironing temperature.

3 Put the iron on its heel.

4 Put the mains plug in an earthed wall socket.

, The temperature light goes on.

5 When the temperature light goes out, wait a while

before you start ironing.

, During ironing, the temperature light goes on from

time to time. This indicates that the iron is heating

up to the set temperature.

Using the appliance

Note: The iron may give off some smoke when you use it for

the rst time. This stops after a short while.

Steam ironing

1 Make sure that there is enough water in the water

tank.

2 Set the recommended ironing temperature (see

chapter‘Preparingforuse’,‘Temperatureandsteam

settingtable’).

3 Set the appropriate steam setting. Make sure

that the steam setting is suitable for the ironing

temperature selected:

- $ for minimum steam (temperature settings 2

and 3).

- & for maximum steam (temperature settings 3

to MAX).

Note: The iron starts to produce steam as soon as it has

reached the set temperature.

Ironing without steam

1 Set the steam control to position 0 (= no

steam) (Fig. 2).

2 Set the recommended ironing temperature (see

chapter‘Preparingforuse’,‘Temperatureandsteam

settingtable’).

Features

Spray function

You can use the spray function at any temperature

to moisten the article to be ironed. This helps

remove stubborn creases.

1 Make sure that there is enough water in the water

tank.

2 Press the spray button several times to moisten the

article to be ironed (Fig. 5).

Steam boost function

A powerful boost of steam helps to remove very

stubborn creases.

The steam boost function only works at temperature

settings between 3 and MAX.

1 Press and release the steam boost button (Fig. 6).

Vertical shot of steam

You can also use the steam boost function when you hold

the iron in vertical position. This is useful for removing

creases from hanging clothes, curtains etc.

1 Hold the iron in vertical position and press and

release the steam boost button (Fig. 7).

Never direct the steam at people.

Drip stop

This iron is equipped with a drip-stop function: the

iron automatically stops producing steam when the

temperature is too low to prevent water from dripping

out of the soleplate. When this happens you hear a click

sound.

Automatic shut-off function (specic

types only)

The automatic shut-off function automatically switches off

the iron if it has not been moved for a while.

, Theredauto-offlightashestoindicatethatthe

iron has been switched off by the automatic shut-

off function (Fig. 8).

To let the iron heat up again:

1 Pick up the iron or move it slightly.

, Theautomaticshut-offlightstopsashing.

, If the temperature of the soleplate has dropped

below the set ironing temperature, the temperature

light goes on.

2 If the temperature light goes on after you have

moved the iron, wait for it to go out before you

start ironing.

Note: If the temperature light does not go on after you move

the iron, the soleplate still has the right temperature and the

iron is ready for use.

Cleaning and maintenance

Cleaning

1 Set the steam control to position 0, remove the

plug from the wall socket and let the iron cool

down.

2 Wipeakesandanyotherdepositsoffthe

soleplate with a damp cloth and a non-abrasive

(liquid) cleaning agent.

To keep the soleplate smooth, avoid hard contact with

metal objects. Never use a scouring pad, vinegar or

other chemicals to clean the soleplate.

3 Clean the upper part of the iron with a damp cloth.

4 Regularly rinse the water tank with water. Empty

the water tank after you have rinsed it (Fig. 9).

Double-Active Calc System (specic types

only)

Note: Refer to chapter ‘General description’ for the specic

type numbers.

The Double-Active Calc System consists of an Anti-Calc

tablet inside the water tank combined with the Calc-

Clean function.

- The Anti-Calc tablet prevents scale from clogging the

steam vents. The tablet is constantly active and does

not need to be replaced (Fig. 10).

- The Calc-Clean function removes scale particles

from the iron.

1

4239.000.7162.2

Valutazione

Maggiori informazioni su questo manuale

Comprendiamo che sia bello avere un manuale cartaceo per i tuoi Philips GC2860 Ferro da stiro. Puoi sempre scaricare il manuale dal nostro sito web e stamparlo tu stesso. Se desideri avere un manuale originale, ti consigliamo di contattare Philips. Potrebbero essere in grado di fornire un manuale originale. Stai cercando il manuale del tuo Philips GC2860 Ferro da stiro in un'altra lingua? Scegli la tua lingua preferita sulla nostra home page e cerca il numero del modello per vedere se è disponibile.

Specifiche

Tutti i manuali per Philips Ferri da stiro
Altri manuali di Ferri da stiro

Domande frequenti su Philips GC2860 Ferro da stiro

Il nostro team di supporto cerca informazioni utili sul prodotto e risposte alle domande più frequenti. Se trovi un’inesattezza nelle nostre domande frequenti, ti preghiamo di farcelo sapere utilizzando il nostro modulo di contatto.

Prodotti correlati

Manuale

Philips PSG6020 PerfectCare Ferro da stiro

Manuale

Philips GC4526 Azur Performer Plus Ferro da stiro

Manuale

Philips GC9405 Ferro da stiro

Manuale

Philips GC6433 Ferro da stiro

Manuale

Philips PSG6042 PerfectCare Ferro da stiro

Manuale

Philips GC8616 PerfectCare Aqua Ferro da stiro

Manuale

Philips GC7057 Ferro da stiro

Manuale

Philips HI5922 Ferro da stiro

Categorie correlate