Manuale Indesit VIB 744 C E IT Piano cottura

Manuale

7

GB

Switching on the cooking zones

Each cooking zone is controlled using a selector button

and a power adjustment device consisting of a

double(-) and (+) button.

• To begin operating a cooking zone, press the

corresponding control button and set the desired

power level (between 0 and 9) using the buttons (-)

or (+)

Press and hold the (-) button to set the power level

immediately at “9”

Press and hold (+) and (-) buttons simultaneously to

return to power level “0”

If the power level is “0” press and hold the (+) button

to increase the power level quickly

The choice of a cooking zone is signalled by a beep

sound, and then the power level is shown on the

display

If the selection of a heater is not done in 10 seconds,

the cooktop will be turned off automatically.

Fast Boil- “Booster” function

The booster function for some of the cooking zones may be

used to shorten heating-up times.

It may be activated by pressing the (+) button over level

9. This function boosts the power to 1600 W or 2000 W,

depending on the size of the relevant cooking zone.

The activation of of the booster is signalled by a beep

sound, and the letter ‘P’ appearing on the display.

The booster works for max 10 minutes. After these 10

minutes a beep sounds and the cooking zone will

return to level “9”

With the heater at Booster level, if the [+] key is

Touched an error beep sounds and the cookset

doesn’t change. With the heater at Booster level, if the

[-] key is Touched a beep sounds and the cookset is

reduced to 9.

Switching off the cooking zones

To switch off a cooking zone, select it using the corresponding

selector button and:

• Press the (-) button: the power of the cooking zone will

progressively decrease until it is switched off.

Once the cooking zone is selected, the heater can

also be switched off by touching the [-] and [+] keys

simultaneously. A beep

sounds and the corresponding display shows “0”.

Using the Timer

! All the cooking zones may be programmed

simultaneously, for a duration between 1 and 99 min.

1. Select the cooking zone using the corresponding

selector button.

2. Adjust the power level of the cooking zone.

3.When required power level is selected, touching again

the corresponding heating zone selector button, a beep

sounds and a ‘t’ letter with dot point appears on the heater

display. The remaining time will be displayed in the opposite

part of timed heater. If timed heating zone is, for example,

in the down part, timed time will appear in up displays.

4. Set the cooking duration using the (-) and the(+)

buttons

The (-) and the(+) buttons touched simultaneously result|

in returning to the 0 value.

If the time is not selected before 10 seconds, or if the

selected time is 0 after 10 seconds the last touch over

the (-)or the (+) button, the timer is switched off.

Starting Timer countdown.

The countdown starts when the timer visualization is

finished touching any cooking zone key or

automatically 10 seconds after the last touch over

the [+] or [-] keys. A beep sounds and the heater

display will show the power

level and the dot point showing that the heater is

timed.

! To change the time for a timed heater, repeat the

process explained above.

!Pressing and holding the + and - keys increases the

speed of time selection

End of Timer countdown.

When the remaining time has run out, the timed heater

is switched off, the heater display shows a blinking ‘0’

and the timer alarm beeps for one minute

The alarm will be cancelled by pressing any key of the

touch control.

Control panel lock

When the hob is switched on, it is possible to lock the oven

controls in order to avoid accidental changes being made to

the settings (by children, during cleaning, etc.).

Press the

button to lock the control panel: -the icon

will illuminate and an audible beep sound will be emmited.

To use any of the controls (e.g. to stop cooking), you

must switch off this function. Press the

button for a

few moments, the icon will stop illuminating and the lock

function will be removed.

All the keys on the cooking zone selection will be locked

if :the cooktop is off,,

if the Control Panel Lock is activated or

if an error on a cooktop occurs.

Valutazione

Maggiori informazioni su questo manuale

Comprendiamo che sia bello avere un manuale cartaceo per i tuoi Indesit VIB 744 C E IT Piano cottura. Puoi sempre scaricare il manuale dal nostro sito web e stamparlo tu stesso. Se desideri avere un manuale originale, ti consigliamo di contattare Indesit. Potrebbero essere in grado di fornire un manuale originale. Stai cercando il manuale del tuo Indesit VIB 744 C E IT Piano cottura in un'altra lingua? Scegli la tua lingua preferita sulla nostra home page e cerca il numero del modello per vedere se è disponibile.

Specifiche

Tutti i manuali per Indesit Piani cottura
Altri manuali di Piani cottura

Domande frequenti su Indesit VIB 744 C E IT Piano cottura

Il nostro team di supporto cerca informazioni utili sul prodotto e risposte alle domande più frequenti. Se trovi un’inesattezza nelle nostre domande frequenti, ti preghiamo di farcelo sapere utilizzando il nostro modulo di contatto.

Prodotti correlati

Manuale

Indesit PAA 642 IX/I WE Piano cottura

Manuale

Indesit VRM 641 D X Piano cottura

Manuale

Indesit IP 751 S (AV) R Piano cottura

Manuale

Indesit IPG 640 S (BK) Piano cottura

Manuale

Indesit PIM 640 AST (IX) Piano cottura

Manuale

Indesit IB 88B60 NE Piano cottura

Manuale

Indesit IVIA 630 L D C Piano cottura

Manuale

Indesit PI 640 AS (GC) Piano cottura

Categorie correlate