Manuale Adler AD 6001 Forno

Manuale

4

put any items.

19. Do not touch the hot surfaces of the oven (door, top or bottom wall and side

walls). Use protective gloves to remove or touch any hot parts.

20. During operation, door glass becomes extremely hot. It must not be heavily hit, or pour

cold water because of the risk of its crack.

21. The power cord can be installed over an oven, and should not touch or be near hot

surfaces. Do not place the oven under the electrical outlet.

22. Due to the high temperature keep special carefulness when removing tray or grate (or

other accessories approved for use in ovens) with baked dishes. Please be careful, when

removing the tray or hot oil or other hot liquids. Use dedicated accessories offered with the

oven or heat-resistant oven gloves.

23. Oversized food must not be inserted, as this may cause fire and damage the appliance.

24. Do not place any cardboard, paper, plastics and other flammable or easily melt objects in

the oven.

25. Do not store any other accessories in the appliance.

26. After cooking and before cleaning the machine, unplug the power cord from the outlet

and leave to cool. Wait a long period of time because the heated oven cools very slowly.

27. Clean the device after each use.

28. Do not use corrosive detergents such as emulsions, creams, pastes, etc. to clean the

casing. They can wipe off the graphic signs on the surface such as scales, marks, warning

signs etc.

29. Do not wash metal parts in the dishwasher, as the corrosive detergents used in these

devices cause darkening of the above parts. It is recommended to wash them by hand, using

traditional dishwashing liquids.

30. To avoid overheating of the oven the crumb tray or any other part of the oven should not

be cover with a metal foil.

31. Do not use metal scouring pads to clean. Broken metal pieces may come into contact

with electrical parts, creating a risk of electric shock.

DEVICE DESCRIPTION

1.Temperature adjustment knob 2. Heating mode selection knob

3.Fan and rotary spit knob 4. Timer / power button

5/13/14.Control lamp 6. Handle for opening glass door

7.Baking tray 8. Grill

9.Rotary spit axis 10. Tray removal handle

11.Spit removal handle 12. Spit jaws (2 pairs)

BEFORE SWITCHING ON

- Make sure the oven is placed on high-temperature resistant base

- Make sure there is enough ventilation space around oven (minimum 10 cm on each side and 30 cm above the oven)

- Make sure the oven is dry

USING THE DEVICE

1.Set temperature adjustment knob (1) to the desired value.

2.Set the heating mode selection knob (2) in position:

- upper lower - Both upper and lower

3.Set the fan and rotary spit knob (3) in position:

- rotary spit - fan - both rotary spit and fan, or do not use any function (leave the knob in 0 position)

4.Set timer (4) to required baking time. A bell is rung upon reaching required baking time.

5.In order to switch the device off before the time has run out, rotate the timer (4) knob to “0”.

6.Always unplug the power cable from the power outlet after use.

USING ROTARY SPIT

1.Put one pair of jaws on the axis sharp side, then slide onto the axis.

2.Impale such prepared spit (9) into the center part of the product to be baked, stick the spit jaws (12) in the product.

3.Put in second pair of jaws according to point 1 and 2, and stick them from other side, “closing" the product on the spit axis.

4.Check that the fixed product is located centrally along spit axis.

5.Place the square end of the spit in the spit drive coupling on the right-hand side of oven heating chamber, and place sharp end in the

bearing on left-hand side.

6.Set temperature adjustment knob (1) to the desired value (for example 200°C )

7.Set the heating mode selection knob (2) to heating with lower heater

8.Set the knob (3) to fan mode.

9.Turn the oven on using timer knob (4), the lamp (5) will illuminate. Set the desired baking time.

10.After the baking time runs out, switch the oven off by rotating the timer (4) knob to “0”. In order to switch the device off before the time

has run out, rotate the timer (4) knob to “0”. Always unplug the power cable from the power outlet after use.

11.Before removing product baked on spit, wait a moment to allow the device to cool. Then grab the spit axis using spit removal handle

(11). First raise left side, and slide to the left, so that right axle end leaves the drive coupling. Then, carefully remove baked meal from the

Valutazione

Maggiori informazioni su questo manuale

Comprendiamo che sia bello avere un manuale cartaceo per i tuoi Adler AD 6001 Forno. Puoi sempre scaricare il manuale dal nostro sito web e stamparlo tu stesso. Se desideri avere un manuale originale, ti consigliamo di contattare Adler. Potrebbero essere in grado di fornire un manuale originale. Stai cercando il manuale del tuo Adler AD 6001 Forno in un'altra lingua? Scegli la tua lingua preferita sulla nostra home page e cerca il numero del modello per vedere se è disponibile.

Specifiche

Tutti i manuali per Adler Forni
Altri manuali di Forni

Domande frequenti su Adler AD 6001 Forno

Il nostro team di supporto cerca informazioni utili sul prodotto e risposte alle domande più frequenti. Se trovi un’inesattezza nelle nostre domande frequenti, ti preghiamo di farcelo sapere utilizzando il nostro modulo di contatto.

Prodotti correlati

Manuale

Adler AD 6024 Forno

Manuale

Adler AD 6010 Forno

Manuale

Adler AD 6020 Forno

Manuale

Adler AD 6309 Forno

Manuale

Adler AD 6023 Forno

Manuale

Candy FCM676B Forno

Manuale

Miele H 2766-1 B 125 Edition Forno

Manuale

Candy FIDC X605 L Forno

Categorie correlate