A5P | 01
trained users.
Maintain power tool/machines. Check for misalignment
or binding of moving parts, breakage of parts and any
other condition that may aect the power tool/machines
operation. If damaged, have the power tool/machines re-
paired before use. Many accidents are caused by poorly
maintained power tool/machines.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edg-
es are less likely to bind and are easier to control.
Use the power tool/machine accessories and tool bits in
accordance with these instructions, take into account the
working conditions and the work to be performed.
Use of the power tool/machine for operations dierent
from those intended could result in a hazardous situation.
CLEANING & MAINTENANCE Never soak or immerse
electrical components and or a component that has a
plug attached.
Disconnect the plug from the power source before mak-
ing any adjustments, changing accessories, or storing.
Such preventive safety measures reduce the risk of start-
ing the power tool accidentally.
Ensure the motor has fully stopped before cleaning,
clearing a blockage, checking, or carrying out any main-
tenance on the tool.
Maintain your power tool. Check for misalignment or
binding of moving parts, breakage of parts and any oth-
er condition that may aect the power tool’s operation.
If damaged, have the power tool repaired by a qualied
repair person before use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
Regularly check external nuts and xings to ensure vibra-
tion caused by normal use has not begun to loosen them.
Store idle power tools out of reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the Breaker.
Locate the power tool out of reach of children, in a dry,
locked unit.
Make sure that the cord is located so that it will not be
stepped on, tripped over, or otherwise subjected to
damage or stress.
Remove the plug from the mains socket / battery (where
applicable) before carrying out any adjustment or main-
tenance.
Always store the power tool/machine in a dry place.
If the power cord is damaged, it must be replaced by a
qualied service technician.
Keep the ventilation slots and motor housing as free of
dirt and dust as possible (where applicable).
Clean the power tool/machine by rubbing it with a clean
cloth and blow it clean using low-pressure compressed
air is recommended.
Ensure you have all the pieces listed. If you are missing
any components, contact our customer services
department at
with assembly if any components are missing.
LAWN TRIMMERS & LAWN EDGE TRIMMERS
Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may aect
the power tool’s operation.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting
accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and could
give the operator an electric shock.
Keep hands away from cutting area. Never reach
underneath the workpiece for any reason. Do not insert
ngers or thumb into the vicinity of the blade and blade
release switch.
BATTERY WARNINGS (INCLUDING BUTTON CELLS,
AA BATTERYS, LITHIUM PACKS)
WARNING The use, and particularly abuse of portable
sealed secondary lithium cells and batteries may result in
the creation of hazards and may cause harm.
Do not dismantle, open or shred secondary cells or
batteries.
Keep batteries out of the reach of children.
NOTE the battery pack is not fully charged out of the box.
Secondary cells and batteries need to be charged before
use, always refer to the cell or battery manufacturer’s in-
structions and use the correct charging procedure.
Recharge only with the charger specied by the manu-
facturer. A charger that is suitable for one type of battery
pack may create a risk of re when used with another
battery pack.
Use the appliance/power tool/machines only with specif-
ically designated battery packs. Use of any other battery
packs may create a risk of injury and re.
First read the safety instructions and then follow the
charging notes and procedures.
Incorrect reassembly may result in a risk of electric shock
or re.
Protect the battery and charger against water and mois-
ture. Always keep cells and batteries clean and dry.
Wipe the cell or battery terminals with a clean dry cloth if
they become dirty.
Protect the battery from heat and re. Place the charger
in a position away from any heat source and avoid stor-
age in direct sunlight.
Do not maintain secondary cells and batteries on charge
when not in use.
After extended periods of storage, it may be necessary to
charge and discharge the cells or batteries several times
to obtain maximum performance.
Do not short-circuit a cell or battery.
Do not store cells or batteries haphazardly in a box or
drawer where they may short-circuit each other or be
short-circuited by conductive materials. When the bat-
tery pack is not in use, keep it away from other metal
objects such as paper clips, coins, keys, nails, screws
or other small metal objects that can make a connection
from one terminal to another. Short-circuiting the battery
terminals together may result in burns or a re.
Do not expose cells or batteries to mechanical shock.
Never attempt to open the battery pack for any reason or
if the plastic housing of the battery pack breaks or cracks,
immediately discontinue use and do not recharge.
When possible, remove the battery from the appliance/
power tool/machine when not in use.
Do not leave a battery on prolonged charge when not in
use or stored for extended periods of time as this may
cause damage to the battery.
To facilitate cooling of the battery pack after use, avoid
placing the charger or battery pack in a warm environ-
ment such as a metal shed or an uninsulated trailer.
To reduce the risk of electric shock, unplug the charger
from the outlet before attempting any cleaning. Remov-
ing the battery pack will not reduce this risk.
In the event of a cell leaking, do not allow the liquid
to come into contact with the skin or eyes. If contact
has been made, wash the aected area with copious
amounts of water and seek medical advice.
Seek medical advice immediately if a cell or battery has
been swallowed.
Always observe the polarity marks (+) and (-) on the cell,
battery and equipment and ensure correct use.
Retain the original cell and battery literature for future
reference
When disposing of secondary cells or batterie, keep cells
or batteries of dierent electrochemical systems sepa-
rate from each other.
Partecipa alla conversazione su questo prodotto
Qui puoi condividere cosa pensi di VonHaus 3500191 Tagliasiepi. Se hai una domanda, leggi prima attentamente il manuale. La richiesta di un manuale può essere effettuata utilizzando il nostro modulo di contatto.