Manuale Tanita BC-548 InnerScan Bilancia

Manuale

GB GBGB

54

TAKING WEIGHT AND BODY FAT READINGS

1. Select Personal Data Number

Press the Up button turn on. Use the Up/Down buttons to select

your Personal data number. Press the Set button to confirm.

(Release the key within 3 seconds or the display will show “Error”.)

The unit will beep and the display will show the programmed data.

The unit will beep again and the display will show “0.0”. Now

step onto the platform.

Note: •If you step onto the platform before “0.0” appears the display will show

“Error” and you will not obtain a reading. Furthermore, if you do not step

onto the measuring platform within about 30 seconds after “0.0” appears,

the power is shut-off automatically.

•When using the “Up” button to turn the unit on, the personal data

number last used will appear first.

•Numbers that are not pre-programmed are automatically skipped.

2. Get Your Readings

Your weight will be shown first.

Continue to stand on the platform.

"00000" will appear on the display and disappear one by one from

left to right.

The display will then flash your weight %FAT, %TBW and BMR alternately 3

times.

Note:Do not step off until Body Fat % is shown.

Note: For children (age 7-17), the unit will only display the Weight

and the Body Fat % (it will not display the Healthy Range

Indicator).

3. Recall Function

While readings flash (step.2), step off scale, press the SET button

to view previous reading.

Press the SET button again to go back to the current Weight and

Body Fat % result display.

PROGRAMMING THE GUEST MODE

TAKING WEIGHT MEASUREMENT ONLY

TROUBLESHOOTING

If the following problems occur ...then...

・A wrong weight format appears followed by kg, lb, or st-lb.

Refer to Switching the Weight Mode on p.2.

・"Lo" appears on the display, or all the data appears and immediately

disappears.

Batteries are low. When this message appears, be sure to replace the batteries immediately, since weak batteries will

affect the accuracy of your measurements. Change all the batteries at the same time with new batteries.

Note:Your settings will not be erased from the memory when you remove the batteries.

・"Error" appears while measuring.

Please stand on the platform keeping movement to a minimum.

The unit cannot accurately measure your weight if it detects movement.

The Body Fat Percentage is more than 75%, readings cannot be obtained from the unit.

・The Body Fat Percentage reading does not appear or "-----" appears after

the weight is measured.

Your personal data has not been programmed. Follow the steps on p.3.

Make sure socks or stockings are removed, and the soles of your feet are clean and properly aligned with the guides

on the measuring platform.

・"OL" appears while measuring.

Reading cannot be obtained if the weight capacity is exceeded.

・No reading is obtained after pressing a feature key.

Step off scale when body fat reading appears, then press feature key.

Guest mode allows you to programme the unit for a one-time use

without resetting a Personal data number.

Press ▼ button to activate the unit. Then follow the

steps: Set Age, Select Female or Male, and Specify Height.

Note : If you step onto the platform before “0.0” appears the display will show

“Error” and you will not obtain a reading.

Select Weight-Only Key

Press the Weight-only key. After 2 or 3 seconds, “0.0” will appear

in the display and the unit will beep. When “0.0” appears in the

display, step onto the platform. The body weight value will appear.

If you remain on the platform, the display will flash for about 30

seconds, and then the power will automatically turn off. If you step

off the platform, the weight will continue to show for about 5

seconds, then “0.0” will appear and the unit will shut off

automatically.

Valutazione

Maggiori informazioni su questo manuale

Comprendiamo che sia bello avere un manuale cartaceo per i tuoi Tanita BC-548 InnerScan Bilancia. Puoi sempre scaricare il manuale dal nostro sito web e stamparlo tu stesso. Se desideri avere un manuale originale, ti consigliamo di contattare Tanita. Potrebbero essere in grado di fornire un manuale originale. Stai cercando il manuale del tuo Tanita BC-548 InnerScan Bilancia in un'altra lingua? Scegli la tua lingua preferita sulla nostra home page e cerca il numero del modello per vedere se è disponibile.

Specifiche

Tutti i manuali per Tanita Bilance
Altri manuali di Bilance

Domande frequenti su Tanita BC-548 InnerScan Bilancia

Il nostro team di supporto cerca informazioni utili sul prodotto e risposte alle domande più frequenti. Se trovi un’inesattezza nelle nostre domande frequenti, ti preghiamo di farcelo sapere utilizzando il nostro modulo di contatto.

Prodotti correlati

Manuale

Tanita HD-386 Bilancia

Manuale

Tanita HD-662 Bilancia

Manuale

Tanita BF-680W Bilancia

Manuale

Tanita HD-390 Bilancia

Manuale

Tanita HS-302 Bilancia

Manuale

Tanita HD-302 Bilancia

Manuale

Tanita BC-718 Bilancia

Manuale

Tanita WB-110MA Bilancia

Categorie correlate