Manuale Sparky M 1010 HD Smerigliatrice angolare

Manuale

7

Original instructions

EN

a) Maintain a rm grip on the power tool

and position your body and arm to al-

low you to resist kickback forces. Al-

ways use auxiliary handle, if provided,

for maximum control over kickback or

torque reaction during start-up. The oper-

ator can control torque reactions or kickback

forces, if proper precautions are taken.

b) Never place your hand near the rotating

accessory. Accessory may kickback over

your hand.

c) Do not position your body in the area

where power tool will move if kickback

occurs. Kickback will propel the tool in di-

rection opposite to the wheel’s movement

at the point of snagging.

d) Use special care when working corners,

sharp edges etc. Avoid bouncing and

snagging the accessory. Corners, sharp

edges or bouncing have a tendency to

snag the rotating accessory and cause loss

of control or kickback.

e) Do not attach a saw chain woodcarving

blade or toothed saw blade. Such blades

create frequent kickback and loss of con-

trol.

▪ Fix the machined piece in vice or in an-

other appropriate way.

Safety Warnings Specic for Grinding

and Abrasive Cutting-Off Operations:

a) Use only wheel types that are recom-

mended for your power tool and the

specic guard designed for the selected

wheel. Wheels for which the power tool

was not designed cannot be adequately

guarded and are unsafe.

b) The grinding surface of centre de-

pressed wheels must be mounted below

the plane of the guard lip. An improperly

mounted wheel that projects through the

plane of the guard lip cannot be adequately

protected.

c) The guard must be securely attached

to the power tool and positioned for

maximum safety, so the least amount of

wheel is exposed towards the operator.

The guard helps to protect operator from

broken wheel fragments, accidental con-

tact with wheel and sparks that could ignite

clohting.

d) Wheels must be used only for recom-

mended applications. For example: do

not grind with the side of cut-off wheel.

Abrasive cut-off wheels are intended for

peripheral grinding, side forces applied to

these wheels may cause them to shatter.

e) Always use undamaged wheel anges

that are of correct size and shape for

your selected wheel. Proper wheel

anges support the wheel thus reduc-

ing the possibility of wheel breakage.

Flanges for cut-off wheels may be different

from grinding wheel anges.

f) Do not use worn down wheels from larg-

er power tools. Wheel intended for larger

power tool is not suitable for the higher

speed of a smaller tool and may burst.

▪ Always pay attention to the wheel rota-

tion direction. The torque reaction is in the

opposite direction of the rotation direction

at the point of binding and this is a prereq-

uisite to loosing control of the power tool.

▪ Always guide the machine in such a way

that sparks and dust can scatter away

from your body. Power tools generate

sparks which may burn your clothes or un-

protected parts of your body.

▪ Grinding and cutting-off operations on

freshly painted metal structures is not

allowed before the paint has become

dry. There is a risk of damp paint ignition.

▪ Cutting of ammable materials (wood,

plastics, etc.) and panel structures

“sandwich” type with ammable lling

is not allowed. There is a risk of re.

▪ Grinding and cutting-off operations on

equipment operating under pressure is

not allowed. There is a risk of explosion.

▪ Grinding and cutting-off operations of

reservoirs, pipelines, equipment, etc.,

containing at present or having con-

tained ammable or easily ignitable

substances or materials is not allowed

without rst taking special precautions

to prevent re and explosion. There is a

risk of re and explosion.

Additional Safety Warnings Specic for

Abrasive Cutting-Off Operations:

a) Do not “jam” the cut-off wheel or apply

excessive pressure. Do not attempt to

make an excessive depth of cut. Over-

stressing the wheel increases the loading

and susceptibility to twisting or binding of

the wheel in the cut and the possibility of

kickback or wheel breakage.

b) Do not position your body in line with

and behind the rotating wheel. When the

wheel, at the point of operation, is moving

away from your body, the possible kickback

may propel the spinning wheel and the

Valutazione

Maggiori informazioni su questo manuale

Comprendiamo che sia bello avere un manuale cartaceo per i tuoi Sparky M 1010 HD Smerigliatrice angolare. Puoi sempre scaricare il manuale dal nostro sito web e stamparlo tu stesso. Se desideri avere un manuale originale, ti consigliamo di contattare Sparky. Potrebbero essere in grado di fornire un manuale originale. Stai cercando il manuale del tuo Sparky M 1010 HD Smerigliatrice angolare in un'altra lingua? Scegli la tua lingua preferita sulla nostra home page e cerca il numero del modello per vedere se è disponibile.

Specifiche

Tutti i manuali per Sparky Smerigliatrici angolari
Altri manuali di Smerigliatrici angolari

Domande frequenti su Sparky M 1010 HD Smerigliatrice angolare

Il nostro team di supporto cerca informazioni utili sul prodotto e risposte alle domande più frequenti. Se trovi un’inesattezza nelle nostre domande frequenti, ti preghiamo di farcelo sapere utilizzando il nostro modulo di contatto.

Prodotti correlati

Manuale

Sparky MB 2400P HD Smerigliatrice angolare

Manuale

Sparky MB 2600PA HD Smerigliatrice angolare

Manuale

Sparky M 18Li-I HD Smerigliatrice angolare

Manuale

Sparky MBA 2000P HD Smerigliatrice angolare

Manuale

Sparky MBA 2600P HD Smerigliatrice angolare

Manuale

Sparky MB 2600P HD Smerigliatrice angolare

Manuale

Sparky MB 1300 HD Smerigliatrice angolare

Manuale

Sparky M 18Li HD Smerigliatrice angolare

Categorie correlate