8
5 (indicator E lights up green)
- if the automatic levelling function is not possible, e.g. because the surface on
which the measuring tool stands deviates by more than 4° from the horizontal
- if this is the case, set up the measuring tool in a level position and wait for the
self-levelling to take place
- as soon as the measuring tool is once again within the self-levelling range of
±4°, the laser lines light up continuously and indicator E lights up green
- when not within the self-levelling range of ±4°, working with automatic levelling
is not possible, because it cannot be assured that the laser lines run at a right
angle to each other
- in case of ground vibrations or position changes during operation, the
measuring tool is automatically levelled in again
- to avoid errors, check the position of the horizontal and vertical laser line with
regard to the reference points upon re-levelling
• Working without automatic levelling
6 (indicator E lights up red)
in your hand or place it on an inclined surface
- the laser lines no longer necessarily run vertical to each other
• Attaching with the holder
thickness between 10 and 60 mm, such as vertical or horizontal boards or pipes
- loosen fastening screw H, mount the holder to the desired location and tighten
the fastening screw again
- place the measuring tool via tripod mount J onto the 1/4” male thread K of the
holder and screw it on applying moderate force
! do not overtighten the measuring tool, otherwise it can become
damaged
locking screw L, move the measuring tool until horizontally positioned at the
desired height and retighten the locking screw
APPLICATION ADVICE
• Always use the centre of the laser line for marking (the width of the laser line
changes with the distance)
• Laser viewing glasses 1 (not standard included)
- laser viewing glasses M 1
- this makes the red light of the laser appear brighter for the eyes
- do not use the laser viewing glasses as safety goggles (the laser viewing
glasses are used for improved visualisation of the laser beam, but they do not
protect against laser radiation)
- do not use the laser viewing glasses as sun glasses or in traffic (the laser
perception)
• Working with the tripod (not standard included)
- tripod N 1
- place the measuring tool via tripod mount J onto the 1/4” male thread of the
tripod and screw the locking screw of the tripod tight
MAINTENANCE / SERVICE
• This tool is not intended for professional use
• Protect the measuring tool against moisture and direct sun light
Partecipa alla conversazione su questo prodotto
Qui puoi condividere cosa pensi di Skil 0511 AB Livella laser. Se hai una domanda, leggi prima attentamente il manuale. La richiesta di un manuale può essere effettuata utilizzando il nostro modulo di contatto.