Manuale Muse M-1229 BT Autoradio

Manuale

1. Do not attempt to modify the unit, modifying the unit may cause an accident.

2. Installation or servicing of the unit by persons without training and experience in electronic

equipment and automotive accessories may be dangerous and could expose you to the risk

of electric shock or other hazards.

3. Stop the vehicle before carrying out any operation that could interfere with your driving.

4. Keep the volume at a level which you could hear sounds from outside the vehicle.

5. Do not work in extremely high or low temperature. Be sure the temperature inside the vehicle

is between +60°C and -10°C before turning on your unit.

6. When replacing the fuse(s), the replacement must be of the same amperage as shown on

the fuse holder.

7. Do not block vents or radiator panels. Blocking them will cause heat to build up inside and

may result in re.

8. Using this unit without running the engine can result in battery drainage.

9. Use only in cars with a 12 volt negative ground.

10. After completing the installation or replacing the car battery, you need to RESET the unit

before using it. Press RESET button on the front panel with pointed object (such as ball-point

pen) to reset the unit to its initial settings.

11. Before you install the unit, remove absolutely the two transportation screws on top of the unit.

Notice on disc

• Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in

malfunctions.

• Do not place more than one disc in the disc compartment.

• Only 12cm discs are compatible.

• If there is a scratch, dirt or ngerprints on the disc, it may cause tracking error. Before playing,

clean the disc with a cleaning cloth. Wipe the disc from the center out. Don’t store discs in

places with high temperatures or high humidity, they can become warped. After playing, store

the disc in its case.

• CD-Rs or CD-RWs playback capability at this player may vary depending on quality of media,

CD-Burner, speed of burning and application software.

Important Note

• Before transporting the unit, remove the disc from the disc compartment.

PRECAUTIONS

UNPACK YOUR UNIT

CONNECTION

INSTALLATION

LOCATION OF CONTROLS

BASIC OPERATIONS

LISTENING TO THE RADIO

SOUND FEATURES

When you unpack your new car radio, make sure that you have removed all the accessories

and information papers:

Main unit

User manual

Accessories:

16. INT / 2 button (To select preset channel 2 in radio mode. To start/ cancel intro playback.)

17. RPT / 3 button (To select preset channel 3 in radio mode. To repeat playback.)

18. RDM / 4 button (To select preset channel 4 in radio mode. To start/ cancel random playback)

19. -10 / 5 button (To select preset channel 5 in radio mode. To select 10 track backward.)

20. +10 / 6 button (To select preset channel 6 in radio mode. To select 10 track forward.)

21. AUX IN jack

22 USB port

23. MIC

1. MUTE button (To mute or restore sound)

2. POW button (To turn on/ off the unit)

3. (eject button)

4. VOL / SEL enter knob

5. / BAND button

6. DISC slot

7. LCD display

8. MICRO SD slot

9. RESET button

10. CLK button (To set clock time) / TRANS (Transfer call)

11. / MODE button ( End call / To select function mode)

12. button

13. button

14. AMS / button (Automatic storing; Search a track)

15. / 1 button (To select preset channel 1 in radio mode. To start or pause playback.)

Caution!

- Make sure to connect the color coded leads according to the diagram. Incorrect connections

may cause the unit to malfunction or damage the vehicle’s electrical system.

- Make sure to connect the speaker (-) leads to the speaker (-) terminal. Never connect the left

and right channel speaker cables each other or to the vehicle body.

- Make sure all the connections are completely correct before turning on your unit.

Turn on/off the unit

Press POW button to turn on the unit. Press this button again to turn off the unit.

Note: When the unit is off, press any key except to turn on the unit.

Selecting the mode

When the unit is on, press MODE button repeatedly to select different source mode: Radio

DISC USB MICRO SD AUX IN PHONE

Note:

- USB, SD mode can not be selected if no such source was plugged in the unit.

- The Bluetooth (“PHONE”) mode can only be selected when your mobile phone is connected

to the unit.

Adjust time:

1. When the unit is on, press and hold CLK button to enter into setting mode. The hour digits

will ash.

2. Rotate volume knob anti-clockwise and clockwise to adjust the hour value. Press this button

again to conrm the hour value.

3. The minute digits will ash, rotate volume knob anti-clockwise and clockwise to adjust the

minute value. Press CLK button to conrm.

Noted: It will conrm your setting if no key is pressed within 5 seconds.

Time display

Press CLK button to display the current time when unit is ON.

NOTE: It will return to normal play mode if no key is pressed within 5 second.

Reset the unit

Operating the unit for the rst time or after replacing the car battery, you must reset the unit.

To set the unit to initial status, press RESET button on front with a pointed object. When some

errors occur in display, you can also reset the unit, but it will erase the clock setting and some

memorized functions.

The unit is installed to be an anti-theft one. The chassis of the unit wears a sliding metal housing.

Please do the connection of the power. Speakers and antenna are according to the requirement

of the instruction book. Then install the sliding metal housing in the car as follows:

Selecting band

In tuner mode, repeatedly press BAND button to select bands in following order: FM1

FM2 FM3.

Manual/automatic tuning

- Manual Tuning

Press and hold button or until “MANUAL” shows on display, then press button or

continuously to select a station upward or downward. Press and hold button or to tune

the station with a faster speed.

Note: it will return to automatic tuning mode if no key is pressed within 2 seconds. “AUTO” will

shows on display 2 seconds.

- Automatic Tuning

Press or once, the radio automatically searches a station upward or downward respectively

and plays when it nds a station. Press or once to stop scanning.

Scanning and memorizing stations

- By AMS / button.

1. In tuner mode, press and hold AMS / button for 3 seconds to start scanning for stations

and store them automatically in memory. All preset stations are scrolled during few seconds.

2. Press AMS / button once to preview the preset stations. To remain on a station, press

again the AMS / button.

- By number button 1-6

1. Tune to a station by or button.

2. Press and hold one of the 1- 6 Number buttons for 2 seconds until display shows the

corresponding number, which indicates that station is stored in the corresponding number

button.

3. Under radio mode, press 1- 6 Number buttons to listen to stored stations.

4. When you are listening to a station stored on a number button, press and hold another number

button for more than 2 seconds to store the station on this number button.

Note: The unit can be stored up to 6 stations for each band.

RDS (Radio Data System)

This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS

data. This system can automatically switch to the broadcast station with the best reception as you

move on long distances (AF switching). Also if a trafc announcement (TA) or programme type

(PTY) is broadcast from a RDS station, no matter what mode you are in. this broadcast is received.

Press and hold volume knob, the unit will enter setting menu.

Shortly press volume knob to choose your desire item. Rotate volume knob to choose

corresponding setting desired: AF (ON/OFF) TA (ON/OFF) EON (ON/OFF) PTY

(PTY OFF/ MUSIC/ SPEECH) TA SEEK/ TA ALARM PI SOUND/ PI MUTE

- Alternative frequency (AF)

When the AF switching mode is selected, the radio scans the signal strength of alternative

frequencies. A new AF is stronger than the current station, it switches over to that frequency for

very short time. (When AF ashes on LCD, it will search for the stronger RDS station.)

Segment off: AF switching mode off.

Segment on: AF switching mode on, and receive RDS information.

Segment ashing: AF switching mode on, but RDS information is not received yet.

- Trafc alarm (TA)

In the TA standby mode, when a trafc announcement broadcast starts, the trafc announcement

broadcast is received as top priority regardless of the function mode so you can listen to it.

If you select TA mode off, while a trafc announcement broadcast is being received, the trafc

announcement broadcast reception is cancelled and the unit goes into the TA standby mode.

- TA SEEK/ TA ALARM

TA SEEK:

When newly tuned station does not receive TP information for 5 seconds, the radio retunes to next

station which doesn’t have the same station (PI) as the last station, but has the TP information.

When TP information gets lost at the current station for retune time which is set by RETUNE S

or RETUNE L, the radio starts to retune to next same PI station. When PI station does not catch

in one cyclic search, the radio retunes to next station with TP information.

Note: In TA SEEK mode, the current station can be changed to the completely different station

because the unit searches TP station when the eld (signal) strength of the current station is

very weak, or the current station has no “TP” signal. (The higher priority is TP rather than PI.)

TA ALARM:

When this mode is selected, any automatic retune mode is not activated. Only double beep

sound (ALARM) is output. So, in this mode, the unit keeps the current station anyhow. (The PI

priority is higher than TP.)

When newly tuned station doesn’t have TP information for 5 seconds, beeps come out. When

TP information gets lost at the current station for retune time, the beep sound is output.

When newly tuned station doesn’t have RDS signal, “PI SEEK” is suppressed somewhat.

Volume adjusting:

To increase or decrease the sound level, rotate volume knob clockwise or anti-clockwise.

Muting the sound

When the unit is ON, press MUTE to mute the sound. Press again to restore.

Using volume knob to select sound feature

Repeatedly press volume knob

To select the desired mode for sound setting in the following order: “BAS” (BASS) “TRE”

(Treble) “BAL” (Balance) “FAD” (Fader) LOUD ON/OFF DSP OFF/

CLASSICS/ POP/ ROCK DX/ LOCAL STEREO/MONO VOL.

After selecting the desired mode, you can adjust the level by rotating the volume knob.

Preset equalizer (EQ)

When you are listening to pop music, classic music or rock music, use the equalizer to adjust

the sound quality. Repeatedly press volume knob to select “DSP OFF” and rotate volume knob

to select different equalizer mode in following order: DSP OFF CLASSICS POP

ROCK.

Switching Loudness On/off

By this function, you can increase the low frequency, which can improve sound sensitivity.

Noted: Please refer to “LISTENING TO THE RADIO” for others items operation.

M-1229 BT

USER MANUAL

CAR RADIO CD/MP3 PLAYER WITH BLUETOOTH &

USB/MICRO SD

Please read the instruction carefully before operating the unit.

Do not connect the ignition wire (red) and the battery wire (yellow), it may cause a short

circuit, even result in re.

English

GB - 1 GB - 2 GB - 3

GB - 4 GB - 5 GB - 6 GB - 7

Front RCA

Left

Rear RCA

Left

Front RCA

Right

Rear RCA

Right

Antenna

Socket

Ground wire (Black)

ISO cable

(Not supplied)

+12VConstant Power Supply (Yellow)

Power Antenna Amplifier Turn On (Blue)

A8

A7

A5

A4

(GREEN/BLACK)

(VIOLET/BLACK)

(WHITE/BLACK)

+ +

+

-

-

(VIOLET)

(GRAY)

+

Speaker

Rear Right

Front Right

Speaker

+

-

(WHITE)

+

(GRAY/BLACK)

--

-

Speaker

Front Left

+

-

-

(GREEN)

+

Speaker

Rear Left

B8

B7

B6

B5

B4

B3

B2

B1

Ignition wire (Red)

A

B

FUSE (15A)

642 8

5

31 7

642 8

5

31 7

4-SPEAKER SYSTEM

ISO connector B

ISO connector A

Fuse holder (15A)

AR-3740A IB MUSE 001 REV0 GB.indd 1 2016/10/21 8:55:45

Valutazione

Maggiori informazioni su questo manuale

Comprendiamo che sia bello avere un manuale cartaceo per i tuoi Muse M-1229 BT Autoradio. Puoi sempre scaricare il manuale dal nostro sito web e stamparlo tu stesso. Se desideri avere un manuale originale, ti consigliamo di contattare Muse. Potrebbero essere in grado di fornire un manuale originale. Stai cercando il manuale del tuo Muse M-1229 BT Autoradio in un'altra lingua? Scegli la tua lingua preferita sulla nostra home page e cerca il numero del modello per vedere se è disponibile.

Specifiche

Tutti i manuali per Muse Autoradio
Altri manuali di Autoradio

Domande frequenti su Muse M-1229 BT Autoradio

Il nostro team di supporto cerca informazioni utili sul prodotto e risposte alle domande più frequenti. Se trovi un’inesattezza nelle nostre domande frequenti, ti preghiamo di farcelo sapere utilizzando il nostro modulo di contatto.

Prodotti correlati

Manuale

Muse M-1230 BT Autoradio

Manuale

Muse M-1009 R Autoradio

Manuale

Muse M-199 BT Autoradio

Manuale

Sony DSX-A410BT Autoradio

Manuale

Sony CDX-S11 Autoradio

Manuale

Sony XAV-V631BT Autoradio

Manuale

Sony XAV-AX200C2 Autoradio

Manuale

Sony XR-CA630X Autoradio

Categorie correlate