Manuale Metabo W 18 L 9-125 Quick Smerigliatrice angolare

Manuale

ENGLISH en

15

c) When the wheel is binding or when

interrupting a cut for any reason, switch off the

power tool and hold it motionless until the

wheel comes to a complete stop. Never attempt

to remove the cut-off wheel from the cut while

the wheel is in motion otherwise kickback may

occur. Investigate and take corrective action to

eliminate the cause of wheel binding.

d) Do not restart the cutting operation in the

workpiece. Let the wheel reach full speed and

carefully re-enter the cut. The wheel may bind,

walk up or kickback if the power tool is restarted in

the workpiece.

e) Support panels or any oversized workpiece

to minimize the risk of wheel pinching and

kickback. Large workpieces tend to sag under

their own weight. Supports must be placed under

the workpiece near the line of cut and near the edge

of the workpiece on both sides of the wheel.

f) Use extra caution when making a “pocket

cut” into existing walls or other blind areas. The

protruding wheel may cut gas or water pipes,

electrical wiring or objects that can cause kickback.

g) Do not attempt to do curved cutting.

Overstressing the wheel increases the loading and

susceptibility to twisting or binding of the wheel in

the cut and the possibility of kickback or wheel

breakage, which can lead to serious injury.

4.5 Safety warnings specific for sanding

operations:

a) Use proper sized sanding disc paper. Follow

the manufacturer’s recommendations, when

selecting sanding paper. Larger sanding paper

extending too far beyond the sanding pad presents

a laceration hazard and may cause snagging,

tearing of the disc or kickback.

4.6 Safety warnings specific for wire

brushing operations:

a) Be aware that wire bristles are thrown by the

brush even during ordinary operation. Do not

overstress the wires by applying excessive

load to the brush. The wire bristles can easily

penetrate light clothing and/or skin.

b) If the use of a guard is specified for wire

brushing, do not allow any interference of the

wire wheel or brush with the guard. Wire wheel

or brush may expand in diameter due to work load

and centrifugal forces.

4.7 Additional Safety Instructions

WARNING – Always wear protective

goggles.

Wear ear protectors.

WARNING – Always operate the power tool

with two hands.

Do not use the guard for cutting-off

operations. When working with cut-off

wheels, always use the parting safety guard for

safety reasons.

Do not use any segmented diamond cut-off wheels

with segment slits >10 mm. Only negative segment

cutting angles are permitted.

Use bonded cut-off wheels only if these are

reinforced.

Use elastic cushioning layers if they have been

supplied with the sanding media and if required.

Observe the specifications of the tool or accessory

manufacturer! Protect wheels from grease or

impact!

Accessories must be stored and handled with care

in accordance with the manufacturer's instructions.

Never use cut-off wheels for roughing work or

deburring! Do not apply pressure to the side of the

cut-off wheels.

The workpiece must lay flat and be secured against

slipping, e.g. using clamps. Large workpieces must

be sufficiently supported.

If accessories with threaded inserts are used, the

end of the spindle may not touch the base of the

hole on the grinding tool. Make sure that the thread

in the accessory is long enough to accommodate

the full length of the spindle. The thread in the

accessory must match the thread on the spindle.

See page 2 and chapter 14. Technical

Specifications for more information on the spindle

length and thread.

Damaged, eccentric or vibrating tools must not be

used.

Avoid damage to gas or water pipes, electrical

cables and load-bearing walls (static).

Remove the battery pack from the machine before

any adjustments, conversions or servicing are

performed.

Before fitting the battery pack, make sure that the

machine is switched off.

Hold the machine when removing and inserting the

battery back such that the on/off switch cannot be

unintentionally pressed

If the machine is defective, remove the battery pack

from the machine.

A damaged or cracked additional handle must be

replaced. Never operate a machine with a defective

additional handle.

A damaged or cracked safety guard must be

replaced. Never operate a machine with a defective

safety guard.

Secure small workpieces. For example, clamp in a

vice.

When working in dusty conditions, ensure that

ventilation openings are not blocked. If it becomes

necessary to remove dust, first remove the battery

pack (use non-metallic objects) and avoid

damaging internal components.

When using dual-purpose (combined grinding and

cut-off wheels), only the following guard types must

be used: type A, type C.

See chapter 11.

Valutazione

Maggiori informazioni su questo manuale

Comprendiamo che sia bello avere un manuale cartaceo per i tuoi Metabo W 18 L 9-125 Quick Smerigliatrice angolare. Puoi sempre scaricare il manuale dal nostro sito web e stamparlo tu stesso. Se desideri avere un manuale originale, ti consigliamo di contattare Metabo. Potrebbero essere in grado di fornire un manuale originale. Stai cercando il manuale del tuo Metabo W 18 L 9-125 Quick Smerigliatrice angolare in un'altra lingua? Scegli la tua lingua preferita sulla nostra home page e cerca il numero del modello per vedere se è disponibile.

Specifiche

Tutti i manuali per Metabo Smerigliatrici angolari
Altri manuali di Smerigliatrici angolari

Domande frequenti su Metabo W 18 L 9-125 Quick Smerigliatrice angolare

Il nostro team di supporto cerca informazioni utili sul prodotto e risposte alle domande più frequenti. Se trovi un’inesattezza nelle nostre domande frequenti, ti preghiamo di farcelo sapere utilizzando il nostro modulo di contatto.

Prodotti correlati

Manuale

Metabo WEP 14-125 Quick Smerigliatrice angolare

Manuale

Metabo WP 11-125 QuickProtect Smerigliatrice angolare

Manuale

Metabo WPB 18 LTX BL 115 Quick Smerigliatrice angolare

Manuale

Metabo W 18 7-115 Smerigliatrice angolare

Manuale

Metabo WEP 14-125 QuickProtect Smerigliatrice angolare

Manuale

Metabo WPS 7-125 Quick Smerigliatrice angolare

Manuale

Metabo WQ 900 Smerigliatrice angolare

Manuale

Metabo W 18 L BL 9-100 Smerigliatrice angolare

Categorie correlate