Manuale Makita 9562CV Smerigliatrice angolare

Manuale

25. Ensure that ventilation openings are kept clear

when working in dusty conditions. If it should

become necessary to clear dust, first discon-

nect the tool from the main supply (use non

metallic objects) and avoid damaging internal

parts.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Installing wheel guard (Fig.1&2)

Important:

Always be sure that the tool is switched off and

unplugged before installing or removing the wheel

guard.

Pull the lever in the direction of the arrow after

loosening the screw.

Install the wheel cover on the bearing box by adjust-

ing the convex of the wheel cover to the concave of

the bearing box.

Turn the wheel cover by 180 degrees. Fasten it with

the screw after pulling lever in the direction of the

arrow for the working purpose, the setting angle of the

wheel cover can be adjusted with the lever.

Removing wheel cover

Follow the installation procedure in reverse to remove

the wheel cover.

Installing side grip (auxiliary handle) (Fig. 3)

Important:

Always be sure that the tool is switched off and

unplugged before installing or removing the side grip.

Always install the side grip on the tool securely before

operation. The side grip can be installed on either side

of the tool, whichever is convenient and keeps the

guard properly positioned. Always hold the tool’s

switch handle and the side grip firmly with both hands

during operation.

Shaft lock (Fig. 4)

Press the shaft lock to prevent spindle rotation when

installing or removing accessories.

CAUTION:

Never actuate the shaft lock when the spindle is

moving. The tool may be damaged.

Installing or removing depressed center

wheel (Fig.5&6)

Important:

Always be sure that the tool is switched off and

unplugged before installing or removing the wheel.

Mount the inner flange onto the spindle. Fit the wheel

on over the inner flange and screw the lock nut onto

the spindle.

To tighten the lock nut, press the shaft lock firmly so

that the spindle cannot revolve, then use the lock nut

wrench and securely tighten clockwise.

To remove the wheel, follow the installation procedure

in reverse.

Switch action (Fig. 7)

CAUTION:

Before plugging in the tool, always check to see that

the switch actuates properly and returns to the ‘‘OFF’’

position when the side of the switch lever is

depressed.

To start the tool, slide the switch lever to ‘‘I’’ position.

For continuous operation, depress the front of the

switch lever and then slide to ‘‘I’’ position as above.

The switch is locked on the position for continuous

operation.

To stop the tool from the locked position, slide the

switch lever to ‘‘O’’position with depressing the rear of

the switch lever.

Speed adjusting dial (For model 9560CV,

9561CV, 9562CV, 9563CV, 9564CV, 9565CV)

(Fig. 8)

The rotating speed can be changed by turning the

speed adjusting dial to a given number setting from 1

to 5.

Higher speed is obtained when the dial is turned in the

direction of number 5. And lower speed is obtained

when it is turned in the direction of number 1.

Refer to the table below for the relationship between

the number settings on the dial and the approximate

rotating speed.

Number min

-1

(R.P.M.)

1 2,800

2 4,000

3 6,500

4 9,000

5 11,000

CAUTION:

•

If the tool is operated continuously at low speeds for

a long time, the motor will get overloaded and

heated up.

•

The speed adjusting dial can be turned only as far

as 5 and back to 1. Do not force it past 5 or 1, or the

speed adjusting function may no longer work.

The tools equipped with electronic function are easy

to operate because of the following features.

•

Constant speed control

Electronic speed control for obtaining constant

speed.

Possible to get fine finish, because the rotating

speed is kept constantly even under the loaded

condition.

•

Soft start feature

Safety and soft start because of suppressed starting

shock.

•

Overload protector

When the tool would be employed over the admis-

sible load, it will stop automatically to protect the

motor and wheel. When the load will come to the

admissible level again, the tool can be started

automatically.

6

Valutazione

Maggiori informazioni su questo manuale

Comprendiamo che sia bello avere un manuale cartaceo per i tuoi Makita 9562CV Smerigliatrice angolare. Puoi sempre scaricare il manuale dal nostro sito web e stamparlo tu stesso. Se desideri avere un manuale originale, ti consigliamo di contattare Makita. Potrebbero essere in grado di fornire un manuale originale. Stai cercando il manuale del tuo Makita 9562CV Smerigliatrice angolare in un'altra lingua? Scegli la tua lingua preferita sulla nostra home page e cerca il numero del modello per vedere se è disponibile.

Specifiche

Tutti i manuali per Makita Smerigliatrici angolari
Altri manuali di Smerigliatrici angolari

Domande frequenti su Makita 9562CV Smerigliatrice angolare

Il nostro team di supporto cerca informazioni utili sul prodotto e risposte alle domande più frequenti. Se trovi un’inesattezza nelle nostre domande frequenti, ti preghiamo di farcelo sapere utilizzando il nostro modulo di contatto.

Prodotti correlati

Manuale

Makita 9566PC Smerigliatrice angolare

Manuale

Makita 9565H Smerigliatrice angolare

Manuale

Makita 9564Z Smerigliatrice angolare

Manuale

Makita GA5080R Smerigliatrice angolare

Manuale

Makita GA048G Smerigliatrice angolare

Manuale

Makita 9564CVL Smerigliatrice angolare

Manuale

Makita GA9050R Smerigliatrice angolare

Manuale

Makita 9565PC Smerigliatrice angolare

Categorie correlate