Manuale ION TTUSB Giradischi

Manuale

3

GENERAL CONTROLS

1. Power Cable: This power cable should be plugged into a wall receptacle AFTER all audio

connections are made.

2. RCA Audio Output Cables:

These cables should be

plugged into the audio inputs of

your home stereo system.

(Please note: you can still copy

records to your computer, even

if the audio outputs of the

turntable are not connected to a

stereo system).

IMPORTANT: There is a switch

on the bottom panel, next to the

RCA cables, that selects

between PHONO/LINE. Use

PHONO level for plugging into

a turntable input on a home

stereo. Use the LINE level for

plugging into CD/AUX/TAPE

inputs.

WARNING: You may damage

your receiver if you plug in a

LINE level into a PHONO

input.

3. USB Audio Output: Use the

included USB Cable to connect

your turntable to your computer. For transferring your vinyl records to your computer, we

have provided two different software packages on the included CD.

4. Power Button: Turns the unit on and off.

5. Platter: This platter must be securely fastened to the turntable prior to operation. The

Motor Drive Belt can be found on the drive ring underneath the platter. See SETUP

INSTRUCTIONS for detailed information on installing the Motor Drive Belt.

6. Start/Stop Buttons: These buttons start and stop the turntable motor. Both buttons have

the same function. If they seem to not be functioning, check to make sure that the Motor

Drive Belt is properly installed in the SETUP INSTRUCTIONS.

7. 1/8” Stereo Line Input: Connect Tape Players, Reel to Reel, or any other audio source

here. This signal is sent to the computer through the USB. Make sure that your phono

cartridge is installed while using this input for maximum sound quality. Also make

sure that your RCA jacks are either plugged into an input device or not in contact with

metal.

Note: The 1/8" audio input is not routed to the turntable's RCA output jacks, only to your

computer via USB.

8. 33 and 45 RPM Buttons: These buttons control the RPM of the turntable platter. A red

LED indicates which RPM mode has been selected.

NOTE: If the turntable is powered down while in the 45 RPM setting, it will return to 33

RPM when it is powered up.

Note: You can record your 78RPM records by recording them at 33 or 45rpm, then

changing them to 78 in the Audacity software.

Valutazione

Maggiori informazioni su questo manuale

Comprendiamo che sia bello avere un manuale cartaceo per i tuoi ION TTUSB Giradischi. Puoi sempre scaricare il manuale dal nostro sito web e stamparlo tu stesso. Se desideri avere un manuale originale, ti consigliamo di contattare ION. Potrebbero essere in grado di fornire un manuale originale. Stai cercando il manuale del tuo ION TTUSB Giradischi in un'altra lingua? Scegli la tua lingua preferita sulla nostra home page e cerca il numero del modello per vedere se è disponibile.

Specifiche

Tutti i manuali per ION Giradischi
Altri manuali di Giradischi

Domande frequenti su ION TTUSB Giradischi

Il nostro team di supporto cerca informazioni utili sul prodotto e risposte alle domande più frequenti. Se trovi un’inesattezza nelle nostre domande frequenti, ti preghiamo di farcelo sapere utilizzando il nostro modulo di contatto.

Prodotti correlati

Manuale

ION Duo Deck Giradischi

Manuale

ION TTUSB05XL Giradischi

Manuale

ION Pure LP Giradischi

Manuale

ION Archive LP Giradischi

Manuale

ION Quick Play Flash Giradischi

Manuale

ION iProfile Giradischi

Manuale

ION Live LP Giradischi

Manuale

ION TTUSB10 Giradischi

Categorie correlate