Manuale Hikoki CG 25SC Tagliabordi

Manuale

3

English

GRASS TRIMMER SAFETY

WARNINGS

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

Safe operation practices

● Training

a) Read the instructions carefully. Be familiar with the

controls and the proper use of the machine.

b) Never allow people unfamiliar with these instructions

or children to use the machine. Local regulations can

restrict the age of the operator.

c) Keep in mind that the operator or user is responsible for

accidents or hazards occurring to other people or their

property.

● Preparation

a) Before use, check the supply and extension cord for

signs of damage or aging. If the cord becomes damaged

during use, disconnect the cord from the supply

immediately. DO NOT TOUCH THE CORD BEFORE

DISCONNECTING THE SUPPLY. Do not use the

appliance if the cord is damaged or worn.

b) Never operate the machine while people, especially

children, or pets are nearby.

c) Wear eye protection, gloves and stout shoes at all times

while operating the machine.

● Operation

a) Keep supply and extension cords away from cutting

means.

b) Use the machine only in daylight or good artifi cial light.

c) Never operate the machine with damaged cover or

without cover in place.

d) Switch on the motor only when the hands and feet are

away from the cutting means.

e) Always disconnect the machine from the power supply

(i.e. remove the plug from the mains or remove the

disabling device)

– whenever leaving the machine unattended;

– before clearing a blockage;

– before checking, cleaning or working on the machine;

– after striking a foreign object;

– whenever the machine starts vibrating abnormally.

f) Take care against injury to feet and hands from the

cutting means.

g) Always ensure that the ventilation openings are kept

clear of debris.

● Maintenance, transport and storage

a) Disconnect the machine from the power supply (i.e.

remove the plug from the mains or remove the disabling

device) before carrying out maintenance or cleaning

work.

b) Use only the manufacturer’s recommended

replacement parts and accessories.

c) Inspect and maintain the machine regularly. Have the

machine repaired only by an authorized repairer.

d) When not in use, store the machine out of the reach of

children.

● Recommendation

a) The appliance should be supplied via a residual current

device (RCD) with a tripping current of not more than 30

mA.

This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

PRECAUTIONS FOR GRASS

TRIMMER

WARNING

1. Exercise patience in all work with the tool. And dress

properly to keep warm.

2. Plan all work ahead to prevent accidents.

3. Do not operate the tool at night or under bad weather

conditions when visibility is poor. And do not operate the

tool when it is raining or right after it has been raining.

Working on slippery ground could lead to an accident if

you lose your balance.

4. Inspect the nylon head before starting work.

Do not use the tool if the nylon head is cracked, scarred

or bent.

Make sure the nylon head is properly attached. A nylon

head that falls apart or comes loose during operation

could cause an accident.

5. Be sure to attach the cover before starting work.

Operating the tool without this parts could lead to injury.

6. Be sure to attach the loop handle before starting work.

Make sure it is not loose but properly attached before

starting work. Hold the loop handle fi rmly during work

and do not swing the tool around, but use the correct

posture and maintain your balance.

Losing your balance during work could lead to an injury.

7. Take care when starting the motor.

Place the tool on level ground.

Do not operate the tool within 15 m of people or animals.

Make sure that the nylon head does not come into

contact with the ground or trees and plants.

A careless start could lead to injury.

8. Before leaving the tool, make sure it is switched OFF.

9. Operate the tool with care near electric cables, gas pipes

and similar installations.

10. Look out for and remove empty cans, wire, stones or

other obstacles before starting work. And do not work

near tree roots or rocks.

Working in such areas could damage the nylon head or

lead to injury.

11. Never touch the nylon head during operation.

Also make sure it does not come into contact with your

hair, clothes, etc.

12. In the following situations, turn off the motor and check

that the nylon head has stopped rotating.

To move to another work area.

To remove rubbish or grass that has become stuck in the

tool.

To remove from the work area obstacles or the rubbish,

grass and chips generated by trimming.

To lay down the tool.

Doing this with the nylon head still rotating could lead to

unexpected accidents.

13. Do not use the tool within 15 m of another person.

When you work with someone else, maintain a distance

of more than 15 m.

Flying chips could lead to unexpected accidents.

When working on unstable surfaces like slopes, make

sure that your co-worker is not exposed to any hazards.

Use whistles or other means for calling the attention of

your co-workers.

14. When grass and other objects become entangled in the

nylon head, turn off the motor and make sure the nylon

head has stopped rotating before removing them.

Removing objects from the nylon head when it is still

rotating will lead to injury.

Continuing operation when foreign matter is stuck in the

nylon head may lead to damage.

15. If the tool is operating poorly and produces strange noise

or vibrations, turn off the motor immediately and ask your

dealer to have it inspected and repaired.

Continued use under these conditions could lead to

injury or tool damage.

0000Book̲CG25SC.indb30000Book̲CG25SC.indb3 2018/01/0514:10:042018/01/0514:10:04

Valutazione

Maggiori informazioni su questo manuale

Comprendiamo che sia bello avere un manuale cartaceo per i tuoi Hikoki CG 25SC Tagliabordi. Puoi sempre scaricare il manuale dal nostro sito web e stamparlo tu stesso. Se desideri avere un manuale originale, ti consigliamo di contattare Hikoki. Potrebbero essere in grado di fornire un manuale originale. Stai cercando il manuale del tuo Hikoki CG 25SC Tagliabordi in un'altra lingua? Scegli la tua lingua preferita sulla nostra home page e cerca il numero del modello per vedere se è disponibile.

Specifiche

Tutti i manuali per Hikoki Tagliabordi
Altri manuali di Tagliabordi

Prodotti correlati

Manuale

Hikoki CG 30SC Tagliabordi

Manuale

Hikoki CG 23ECP(SL) Tagliabordi

Manuale

Hikoki CG 25EUAP (L) Tagliabordi

Manuale

Hikoki CG 27EBDP(SLN) Tagliabordi

Manuale

Hikoki CG 36DA Tagliabordi

Manuale

Hikoki CG 25EUAP Tagliabordi

Manuale

Hikoki CG 31EBS(P) Tagliabordi

Manuale

Hikoki CG 24ECP(S) Tagliabordi

Categorie correlate