Manuale Freestyle Mariner Orologio da polso

Hai bisogno di un manuale per il tuo Freestyle Mariner Orologio da polso? Di seguito è possibile visualizzare e scaricare gratuitamente il manuale in PDF in italiano. Questo prodotto attualmente ha 6 domande frequenti, 0 commenti e ha 0 voti. Se questo non è il manuale che desideri, contattaci.

Il tuo prodotto è difettoso e il manuale non fornisce alcuna soluzione? Rivolgiti a un Repair Café per il servizio di riparazione gratuita.

Manuale

Loading…

To reduce carbon foot print, these
Freestyle instructions are printed with
soy inks on recycled paper.
ENGLISH
(CHIME) setting will blink. Press S1
button to toggle between ON and OFF
for the hourly chime setting.
10. When nished making all the settings,
press S3 button to conrm.
NOTE: The hourly chime setting will apply
to both HOME TIME mode and FOREIGN
TIME mode.
TO USE THE CHRONOGRAPH:
1. Press S2 button to select CHRONO-
GRAPH mode.
2. The chronograph will then be displayed
in its current state – stopped, running
or reset.
3. To resume a stopped counting, press
S1 button to resume from where it left
off.
4. To start a new counting, reset the
chronograph to zero rst.
Press S1 button to stop counting, then
press S3 button to reset counter to
zero.
For the measurement of elapsed time:
In CHRONOGRAPH mode,
1. Press S1 button to start counting.
2. To stop counting, press S1 button once.
Press S1 button again to resume from
where it left off.
3. To reset to zero, press S1 button to stop
counting and then press S3 button.
For the measurement of split time:
In CHRONOGRAPH mode,
1, Press S1 button to start counting.
2, While the chronograph is running,
press S3 button once to register a lap.
The split time of the registered lap will
be displayed. The chronograph is still
running in the background.
3. To display the current elapsed time,
press S3 button again.
4. Repeat the last step until all the laps
have been registered.
5. To reset to zero, press S1 button to stop
counting and then press S3 button.
For the measurement of two nishes:
In CHRONOGRAPH mode,
1. Press S1 button to start counting.
2. While the chronograph is running,
press S3 button to register and display
the time of the rst runner. The
chronograph is still running in the
background.
3. Press S1 button to stop and register the
time of the second runner.
4. Press S3 button to display the time of
the second runner.
5. To reset to zero, press S3 button again.
NOTE: The chronograph can count up to
a maximum of 23 hours, 59 minutes and
59.99 seconds.
NOTE: You can leave the chronograph
running while switching over to other
operating modes.
TO SET THE TIMER:
1. Press S2 button to select TIMER mode.
2. Press S3 button, the message “HOLD
TO SET” will be displayed for approxi-
mately 3 seconds and the hour digits
will blink.
3. Press S1 button to alter the timer set-
ting among 60, 55, 50, 45, 40, 35, 30, 25,
20, 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4,
3, 2, and 1 minutes.
4. Press S2 button, the “Action-at-End”
setting will blink. Press S1 button to
select among STOP AT END (STOP),
REPEAT AT END (REPEAT) and COUNT
UP AT END (UP).
5. When nished making all the settings,
press S3 button to conrm.
NOTE: Denitions of Action-at-End setting
option:
a) STOP AT END – the timer will stop
when the countdown reaches zero.
b) REPEAT AT END – the timer will repeat
the countdown when the countdown
reaches zero.
c) COUNT UP AT END – the timer will
count up to a maximum of 23 hours
59 minutes and 59 seconds when the
countdown reaches zero.
TO USE THE TIMER:
1. Press S3 button to select TIMER mode.
2. The timer will then be displayed in its
current state – stopped, running, or
reset.
3. To resume a stopped counting, press
S1 button to resume from where it left
off.
4. To start a new counting, reload the
timer rst.
Press S1 button to stop counting, then
press S3 button to reload the timer.
5. When reaching zero in a countdown, a
tune will be emitted. To stop the tune,
press any button.
NOTE: You can leave the timer running
while switching to other operating modes.
TO SET THE ALARM TIME:
1. Press S2 button to select ALARM
mode.
2. Press and hold S3 button, the message
“HOLD TO SET” will be displayed and
the hour digits will blink. Press S1 but-
ton to set the hour digits. Holding down
the button will speed up the process.
3. Press S2 button, the minute digits will
blink. Press S1 button to set the minute
digits. Holding down the button will
speed up the process.
4. When nished making all the settings,
press S3 button to conrm.
NOTE: The alarm will automatically be
activated after being set.
TO TURN ON/OFF THE ALARM:
In ALARM mode, press S1 button to toggle
between ON and OFF of the alarm. When
the alarm is ON, the alarm indicator
will appear.
WHEN AN ALARM GOES OFF:
A 20-second alarm tune will be emitted
at the designated time when the alarm
is activated. To stop the tune, press any
button.
TO USE THE BACKLIGHT:
Press S4 button to turn on the backlight
for 3 seconds.
FS_119 MARINER_AG7502-FS-INST-PKG-R00
S1. Start/stop button
S2. Mode button
S3. Set/reset button
S4. Light button
SPECIAL FEATURE:
This Freestyle product features unique
Hydro Pushers®: these pushers can be
pressed under water to a dynamic water
pressure (not water depth) of 3 ATM.
DISPLAY MODES:
The watch has four display modes: HOME
TIME (T1)/FOREIGN TIME (T2), CHORONO-
GRAPH (CHRONO), TIMER and ALARM.
To change from one display mode to
another, press S2 button once.
Note: In any setting mode, if there is no
button pressed for a few minutes, the
watch will automatically save the entered
data and exit the setting procedure.
HOME AND FOREIGN TIME DISPLAY:
To display FOREIGN TIME mode, press
and hold S1 button when HOME TIME
mode is displayed. The mode descrip-
tion (T2) will be displayed and blink for
approximately 5 seconds before switching
to FOREIGN TIME mode. To change back
to HOME TIME mode, press and hold S1
button again.
TO SET THE TIME AND CALENDAR:
1. Press S2 button to select HOME TIME
(T1)/FOREIGN TIME (T2) mode.
2. Press and hold S3 button, the message
“HOLD TO SET” will be displayed for
approximately 3 seconds and the time
zone setting will blink.
3. Press S1 button to toggle between
HOME TIME (T1) and FOREIGN TIME
(T2) to set.
4. Press S2 button, the hour digits will
blink. Press S1 button to set the hour
digits. Holding down the button will
speed up the process.
5. Press S2 button, the minute digits will
blink. Press S1 button to set the minute
digits. Holding down the button will
speed up the process.
6. Press S2 button, the second digits
will blink. Press S1 button to reset the
second digits to zero.
7. Follow the same pattern to set the year,
month and date.
8. Press S2 button, the hour format set-
ting will blink. Press S1 button to toggle
between 12-hour and 24-hour format.
The A.M. or P.M. indicator may be dis-
played to indicate the time period 12:00
A.M. – 11:59 A.M. or 12:00 P.M. – 11:59
P.M. respectively in 12-hour format.
9. Press S2 button, the hourly chime
MARINER
S1
S2
S3
S4
Scarica il manuale in italiano (PDF, 0.67 MB)
(Rispetta l’ambiente e stampa questo manuale solo se è veramente necessario)

Loading…

Valutazione

Facci sapere che cosa pensi della Freestyle Mariner Orologio da polso valutando il prodotto. Vuoi condividere la tua esperienze con questo prodotto o porre una domanda? Ti preghiamo di lasciare un commento al fondo della pagina.
Sei soddisfatto di Freestyle Mariner Orologio da polso?
No
Valuta per primo questo prodotto
0 voti

Partecipa alla conversazione su questo prodotto

Qui puoi condividere cosa pensi di Freestyle Mariner Orologio da polso. Se hai una domanda, leggi prima attentamente il manuale. La richiesta di un manuale può essere effettuata utilizzando il nostro modulo di contatto.

Maggiori informazioni su questo manuale

Comprendiamo che sia bello avere un manuale cartaceo per i tuoi Freestyle Mariner Orologio da polso. Puoi sempre scaricare il manuale dal nostro sito web e stamparlo tu stesso. Se desideri avere un manuale originale, ti consigliamo di contattare Freestyle. Potrebbero essere in grado di fornire un manuale originale. Stai cercando il manuale del tuo Freestyle Mariner Orologio da polso in un'altra lingua? Scegli la tua lingua preferita sulla nostra home page e cerca il numero del modello per vedere se è disponibile.

Specifiche

Marca Freestyle
Modello Mariner
Categoria Orologi da polso
Tipo di file PDF
Dimensione del file 0.67 MB

Tutti i manuali per Freestyle Orologi da polso
Altri manuali di Orologi da polso

Domande frequenti su Freestyle Mariner Orologio da polso

Il nostro team di supporto cerca informazioni utili sul prodotto e risposte alle domande più frequenti. Se trovi un’inesattezza nelle nostre domande frequenti, ti preghiamo di farcelo sapere utilizzando il nostro modulo di contatto.

Una pila del dispositivo si è ossidata, posso utilizzarlo ancora? Verificato

Sì, il dispositivo si può utilizzare ancora. Prima di tutto, rimuovere la pila ossidata. Non farlo mai a mani nude. Pulire quindi il vano della batteria con un cotton fioc bagnato di aceto o succo di limone. Lasciar asciugare e inserire le nuove pile.

È stato utile (780) Per saperne di più

Il mio orologio meccanico va veloce, cosa posso fare? Verificato

Questo problema potrebbe essere causato dall'esposizione a un campo magnetico. Si può risolvere con un processo di smagnetizzazione eseguito da un orologiaio professionista.

È stato utile (753) Per saperne di più

Cosa significano AM e PM? Verificato

AM significa Ante Meridiem e indica le ore prima di mezzogiorno. PM significa Post Meridiem e indica le ore dopo mezzogiorno.

È stato utile (650) Per saperne di più

Cos’è un “cronografo”? Verificato

Un “cronografo” è letteralmente uno “scrittore del tempo”. Questo termine è utilizzato per descrivere gli orologi che indicano l’ora ma che possono anche misurare un determinato periodo di tempo, come un cronometro.

È stato utile (562) Per saperne di più

Che cosa è il GMT? Verificato

GMT sta per Tempo medio di Greenwich (a volte chiamato UTC, tempo coordinato universale). È l’ora alla longitudine 0 che passa da Greenwich, vicino a Londra.

È stato utile (388) Per saperne di più

Che cos’è il movimento al quarzo? Verificato

Gli orologi al quarzo sono alimentati a batteria. Questa trasmette corrente ai cristalli di quarzo che emettono delle vibrazioni responsabili del movimento. Dato che le vibrazioni hanno una frequenza fissa, gli orologi al quarzo sono estremamente precisi.

È stato utile (386) Per saperne di più
Manuale Freestyle Mariner Orologio da polso

Prodotti correlati

Categorie correlate