Manuale Dolmar MH-246.4D Tagliasiepi

Manuale

4

Starting the pole hedge trimmer

- Before assembling or adjusting the equipment, switch off the engine and remove

the spark plug cap.

- Before starting the pole hedge trimmer, always make sure that the machine is in

safe operational condition.

- Never attempt to start the engine if the equipment is damaged.

- Check the operation of the throttle lever safety mechanism. The lock-off lever

should have a smooth and easy action. Make sure that the lock-off lever functions

properly. Check that the handles are clean and dry and test the STOP switch to

ensure that it is functioning properly.

Always start the pole hedge trimmer in accordance with the directions provided in

this instruction manual.

Follow the instructions below to start the pole hedge trimmer

- Start the pole hedge trimmer only after the machine has been completely

assembled and all accessory parts have been attached.

- When starting the engine, keep the blades clear of your body and other object,

including the ground. The blades may move when starting and may cause serious

injury or damage to the blades and/or property.

- Before starting the engine, make sure that cutter blades are not obstructed by

any foreign objects such as stones, branches, etc.

- Stop the engine immediately if engine problems occur.

- When pulling the starter knob, hold the equipment rmly against the ground by

your left hand. Never step on the drive shaft.

- If the blades move at idle, stop the engine and adjust the idle speed down.

- When operating the pole hedge trimmer, always maintain a rm grip on both

handles. Wrap your ngers tightly around each handle, cradling the handle

between thumb and forenger. To keep the pole hedge trimmer under control at

all times, avoid changing your grip during operation. Make sure that the control

handles are in good condition and free of moisture, mud, oil or grease.

Always ensure secure and well-balanced footing

- Always stop the engine immediately and discontinue operation if engine trouble

occurs or if the machine starts making unusual noise.

- Exhaust fumes are poisonous. Never operate the machine in an enclosed room

or tunnel without ventilation (risk of suffocation and gas poisoning). Note that

carbon monoxide is an odorless gas. Always make sure that areas where the

engine is operated are adequately ventilated.

- Stop the engine when resting, or when the pole hedge trimmer is left unattended.

Place the machine in a safe location and make sure that no combustible material

is nearby.

- Never place a hot pole hedge trimmer onto dry grass or combustible material.

- To reduce the risk of re, keep the engine and mufer free of debris, leaves or

excessive lubricant.

- Never operate the engine if the mufer is malfunctioning.

- Turn off the engine before transportation.

- Always stop the engine when:

• Resting

• Transporting the machine

• Cleaning the machine

• Refuelling the machine

• Performing maintenance on the machine

• Fixing a problem with the machine

- When carrying the equipment, carry it in a horizontal position by holding the shaft.

Keep the hot mufer away from your body.

- When transporting the machine in a vehicle, always securely attach the pole

hedge trimmer to avoid leakage of residual fuel.

- Always empty the fuel tank before transporting the pole hedge trimmer in a

vehicle.

- When unloading the machine from a vehicle, take extra care not to drop the pole

hedge trimmer to the ground, as this may seriously damage the fuel tank.

- Except in an emergency, never drop the pole hedge trimmer as this may seriously

damage the machine.

- When transporting the pole hedge trimmer, always lift the machine completely off

of the ground. Never drag the engine across the ground as this may damage the

fuel tank and possibly cause a re.

- Always use the cutter cover provided to protect and secure the cutting section of

the pole hedge trimmer during transportation and storage.

- If the equipment gets heavy impact or fall, check the condition before continuing

work. Check the fuel system for fuel leakage and the controls and safety devices

for malfunction. If there is any damage or doubt, ask our authorized service

center for the inspection and repair.

- Resting

- Transporting the machine

- Cleaning the machine

- Refuelling the machine

- Performing maintenance on

the machine

- Fixing a problem with the

machine

Valutazione

Maggiori informazioni su questo manuale

Comprendiamo che sia bello avere un manuale cartaceo per i tuoi Dolmar MH-246.4D Tagliasiepi. Puoi sempre scaricare il manuale dal nostro sito web e stamparlo tu stesso. Se desideri avere un manuale originale, ti consigliamo di contattare Dolmar. Potrebbero essere in grado di fornire un manuale originale. Stai cercando il manuale del tuo Dolmar MH-246.4D Tagliasiepi in un'altra lingua? Scegli la tua lingua preferita sulla nostra home page e cerca il numero del modello per vedere se è disponibile.

Specifiche

Tutti i manuali per Dolmar Tagliasiepi
Altri manuali di Tagliasiepi

Domande frequenti su Dolmar MH-246.4D Tagliasiepi

Il nostro team di supporto cerca informazioni utili sul prodotto e risposte alle domande più frequenti. Se trovi un’inesattezza nelle nostre domande frequenti, ti preghiamo di farcelo sapere utilizzando il nostro modulo di contatto.

Prodotti correlati

Manuale

Dolmar AH-3665 Tagliasiepi

Manuale

Dolmar AH-3655 Tagliasiepi

Manuale

Dolmar HT-42 Tagliasiepi

Manuale

Dolmar HT-2360D Tagliasiepi

Manuale

Dolmar AH-1852H Tagliasiepi

Manuale

Dolmar AH-1853H Tagliasiepi

Manuale

Dolmar HT-48 Tagliasiepi

Manuale

Dolmar HT-52 Tagliasiepi

Categorie correlate