Manuale Candy A 9010 Smart Lavastoviglie

Manuale

2120

Operating the programmes

and special functions

Use in conjunction with programme guide

Setting a programme

Open the door press the button; the last

programme selected will appear on the display.

To set a new programme, press the Programme

Selection Button "P". When the required

programme is shown in the display, press the

"Start" button. The time of the selected

programme (in hours and minutes) will start to

flash in the display.

Close the door and after an audible signal has

sounded (if it has not been deactivated) the

programme will start automatically.

Half load button

By pressing this button it is possible to wash a

small quantity of crockery using only the upper

basket for dishes and cutlery in the bottom

basket.

This reduces water and energy consumption

and requires a smaller quantity of detergent.

Please Note:

When the START Button has been selected it

is not possible to deselect it.

HPS button (High Pressure System)

Your dishwasher is fitted with a two speed

motor. By pressing the HPS Button, the motor

operates at a higher speed which will result in

higher water pressure, to attack the dirt.

The HPS option is particularly suitable for

washing pans, pots and heavily soiled crockery.

Please Note:

This option must be selected before pres-

sing the START button.

Economy button E

The "E" button reduces the temperature of the

water during the last rinse, provides an energy

saving of more than 20% and shortens the

cycle.

Recommended for evening washes when the

dishes are not required perfectly dry, straight

away.

Interrupting a programme

It is not recommended that the door be opened

while a programme is running, and especially

not during the main wash phase and final

drying.

However, the appliance will stop automatically

when the door is opened.

At this point the various wash options can be

programmed or cancelled. The current program-

me can also be cancelled.

If, the door is opened during a programme, the

symbol for that programme will flash in the

display and the machine stops.

Please Note:

If you open the door during the drying cycle

an audible audio signal advises you that the

drying cycle has not yet completed.

To restart the machine, press the "Start" button

and the time remaining for the programme will

flash. Now close the door.

If you wish to cancel or change a programme

that is running, carry out the following:

open the door keep the "Start" button

pressed in until the number of the

programme stops flashing. A new

programme can now be set.

NB: If, on pressing the "Start" button the

symbol "00" starts to flash on the display, it

means that there is water in the machine.

Close the door to allow the water to be

discharged and wait for the audible signal, after

which the new programme can be set.

Before starting a new programme, you should

check that there is still detergent in the dispenser.

If necessary, top up the dispenser.

End of programme

The end of the programme is indicated by an

audible signal (if it has not been deactivated).

When the door is opened the number of the

programme that has just finished will appear on

the display.

Important:

If the programme shown in the display starts

to flash and the machine will not let any more

programmes be selected, press the “START”

button and keep this button pressed until the

display stops flashing.

Delay Start programme button

To set the delay start programme press the

button.

On the first press the current setting appears on

the display. Each time the button is pressed the

delayed time in one hour increments increases,

up to a maximum of 19 hours.

Once set, wait until the selected time is confirmed

when it appears in the display. Press the "Start"

button to start the countdown. If the countdown

has not already been activated, the delay start

can be cancelled by pressing the button

until the selected programme appears on the

display.

The delay start can be cancelled at any time

simply by keeping the "Start" button pressed in

until the required wash cycle appears on the

display.

If you wish to see which programme has been

selected, press the "Programme Selection"

button “P”.

NB: If the door is opened during the countdown,

for example to select one of the options (or to

add more dishes), the "Start" button should be

pressed before closing the door again, in order

to restart the countdown.

Activating and deactivating the audible

signal

The audible signal function can be deactivated

in the following way:

keep the Programme Selection Button (P)

pressed in for a few seconds and at the same

time press the stop/start button ; if the

symbol "b1" appears on the display the audible

signal is activated. Press the programme

selection button (P) again and the symbol "b0"

will appear which means that the audible signal

has been deactivated.

An audible signal sounds to indicate that the

setting has been stored in memory.

Attention

This dishwasher is equipped with an

anti-overflow safety device which works even

when power is off, and if the water level is too

high, the supply will automatically be closed off.

Important

To ensure the correct operation of the

anti-overflow safety device, it is recommended

not to move or to tilt the dishwasher during

operation.

If it is necessary to move or to tilt the

dishwasher, first make sure the washing cycle is

finished and that no water is left in the tank.

I

I

Display shows E1.

Display shows E2.

Display shows E3.

Display shows E4.

Display shows E5.

PROBLEM CAUSE REMEDY

The Dishwasher is able to self-assess a number of problems. The problem will

be illustrated in the display window and by an audible signal.

Water supply switched off.

Problem with electronic temperature

control.

Problem with Water Heater element.

The appliance does not discharge

water.

Problem with electronic load device.

Switch off appliance.

Turn on water supply.

Reset the cycle.

Call Service for assistance.

Call Service for assistance.

Check :

• That the discharge hose is not

bent

• Syphon is not blocked

• Filters are not blocked

Call Service for assistance.

PROBLEMS AUTOMATICALLY SIGNED

Valutazione

Maggiori informazioni su questo manuale

Comprendiamo che sia bello avere un manuale cartaceo per i tuoi Candy A 9010 Smart Lavastoviglie. Puoi sempre scaricare il manuale dal nostro sito web e stamparlo tu stesso. Se desideri avere un manuale originale, ti consigliamo di contattare Candy. Potrebbero essere in grado di fornire un manuale originale. Stai cercando il manuale del tuo Candy A 9010 Smart Lavastoviglie in un'altra lingua? Scegli la tua lingua preferita sulla nostra home page e cerca il numero del modello per vedere se è disponibile.

Specifiche

Tutti i manuali per Candy Lavastoviglii
Altri manuali di Lavastoviglii

Domande frequenti su Candy A 9010 Smart Lavastoviglie

Il nostro team di supporto cerca informazioni utili sul prodotto e risposte alle domande più frequenti. Se trovi un’inesattezza nelle nostre domande frequenti, ti preghiamo di farcelo sapere utilizzando il nostro modulo di contatto.

Prodotti correlati

Manuale

Candy CDSN 1L350PB Lavastoviglie

Manuale

Candy CF 5C6F0W Lavastoviglie

Manuale

Candy CDIH 1L952 Lavastoviglie

Manuale

Candy CDIMN 4D622PB/E Lavastoviglie

Manuale

Candy H CF 3C7LFX Lavastoviglie

Manuale

Candy CF 3E9E0W Lavastoviglie

Manuale

Candy CI 4C6F0A Lavastoviglie

Manuale

Candy CDPH 2L1049W-01 Lavastoviglie

Categorie correlate