Manuale Bowers and Wilkins DM602.5 S3 Altoparlante

Manuale

English

Limited Warranty

Dear customer,

Welcome to B&W.

This product has been designed and

manufactured to the highest quality

standards. However, if something does go

wrong with this product, B&W

Loudspeakers and its national distributors

warrant free of charge labour (exclusion

may apply) and replacement parts in any

country served by an official B&W

distributor.

This limited warranty is valid for a period of

five years from the date of purchase or two

years for electronics including amplified

loudspeakers.

Terms and Conditions

1 The warranty is limited to the repair of

the equipment. Neither transportation,

nor any other costs, nor any risk for

removal, transportation and installation

of products is covered by this warranty.

2 This warranty is only valid for the

original owner. It is not transferable.

3 This warranty will not be applicable in

cases other than defects in materials

and/or workmanship at the time of

purchase and will not be applicable:

a. for damages caused by incorrect

installation, connection or packing,

b. for damages caused by any use other

than correct use described in the user

manual, negligence, modifications, or

use of parts that are not made or

authorised by B&W,

c. for damages caused by faulty or

unsuitable ancillary equipment,

d. for damages caused by accidents,

lightning, water, fire heat, war, public

disturbances or any other cause

beyond the reasonable control of B&W

and its appointed distributors,

e. for products whose serial number has

been altered, deleted, removed or

made illegible,

f. if repairs or modifications have been

executed by an unauthorised person.

4 This guarantee complements any

national/regional law obligations of

dealers or national distributors and

does not affect your statutory rights as

a customer.

How to claim repairs under

warranty

Should service be required, please follow

the following procedure:

1 If the equipment is being used in the

country of purchase, you should

contact the B&W authorised dealer

from whom the equipment was

purchased.

2 If the equipment is being used outside

the country of purchase, you should

contact B&W national distributor in the

country of residence who will advise

where the equipment can be serviced.

You can call B&W in the UK or visit our

web site to get the contact details of

your local distributor.

To validate your warranty, you will need to

produce this warranty booklet completed

and stamped by your dealer on the date of

purchase. Alternatively, you will need the

original sales invoice or other proof of

ownership and date of purchase.

Owner’s manual

Introduction

Thank you for choosing Bowers & Wilkins.

We are confident that you will enjoy many

years of listening pleasure from your

speakers, but please read this manual fully

before installing them. It will help you

optimise their performance.

B&W maintains a network of dedicated

distributors in over 60 countries who will be

able to help you should you have any

problems your dealer cannot resolve.

Unpacking (figure 1)

• After opening the top carton flaps,

remove the accessories from the

polystyrene tray.

• Fold the carton flaps right back and

invert the carton and contents.

• Lift the carton clear of the contents,

remove the upper polystyrene tray and

retrieve the separate grille.

• Turn the speaker over again and remove

the remaining packaging.

• Remove the protection cover from the

tweeter and fit the grille if required,

applying pressure over the position of the

pegs.

We suggest you retain the packing for

future use.

Positioning (figure 2)

Do not fit the spike feet until you have

found the best position for your speakers.

As an initial guide:

• Position the speakers and the centre of

the listening area approximately at the

corners of an equilateral triangle.

• Keep the speakers at least 1.5m apart to

maintain left-right separation.

• Keep the speaker baffles at least 0.5m

clear of walls.

Stray magnetic fields

The speaker drive units create stray

magnetic fields that extend beyond the

boundaries of the cabinet. We recommend

you keep magnetically sensitive articles

(television and computer screens, computer

discs, audio and video tapes, swipe cards

and the like) at least 0.5m from the

speaker.

Connections (figure 3)

All connections should be made with the

equipment switched off.

There are 2 pairs of terminals at the back of

the speaker which permit bi-wiring if

desired. On delivery, the separate pairs are

connected together with high-quality links

for use with a single 2-core cable. For

single cable connection, leave the links in

place and use either pair of terminals on

the speaker.

Ensure the positive terminal on the speaker

(marked + and coloured red) is connected

to the positive output terminal of the

amplifier and negative (marked – and

coloured black) to negative. Incorrect

connection can result in poor imaging and

loss of bass.

To bi-wire, remove the links by loosening

the terminal caps and use a separate

2-core cable from the amplifier to each pair

of terminals. This can improve the

resolution of low-level detail. Observe the

correct polarity as before. When bi-wiring,

incorrect connection can also impair the

frequency response.

The terminals accept 6mm (

1

/

4

-in) spades,

bared wire ends or round pins up to 6mm

diameter and 4mm banana plugs. When

using spades, fit them under the sliding

collar.

Important safety notice:

In certain countries, notably those in

Europe, the use of 4mm banana plugs is

considered a potential safety hazard,

because they may be inserted into the

holes of unshuttered mains supply sockets.

In order to comply with European

CENELEC safety regulations, the 4mm

holes in the ends of the terminals are

blocked by plastic pins. Do not remove the

pins if you are using the product where

these conditions apply.

Always screw the terminal caps down

tightly to optimise the connection and

prevent rattles.

Ask your dealer for advice when choosing

cable. Keep the total impedance below the

maximum recommended in the

specification and use a low inductance

cable to avoid attenuation of the highest

frequencies.

Fine tuning

Before fine tuning, double check that all the

connections in the installation are correct

and secure.

Moving the speakers further from the walls

will reduce the general level of bass. Space

behind the speakers also helps to create an

impression of depth. Conversely, moving

the speakers closer to the walls will

increase the level of bass.

If you want to reduce the bass level without

moving the speakers further from the wall,

fit the foam plugs in the port tubes

(figure 4).

If the bass is uneven with frequency it is

usually due to the excitation of resonance

modes in the room. Even small changes in

the position of the speakers or the listeners

1

Valutazione

Maggiori informazioni su questo manuale

Comprendiamo che sia bello avere un manuale cartaceo per i tuoi Bowers and Wilkins DM602.5 S3 Altoparlante. Puoi sempre scaricare il manuale dal nostro sito web e stamparlo tu stesso. Se desideri avere un manuale originale, ti consigliamo di contattare Bowers and Wilkins. Potrebbero essere in grado di fornire un manuale originale. Stai cercando il manuale del tuo Bowers and Wilkins DM602.5 S3 Altoparlante in un'altra lingua? Scegli la tua lingua preferita sulla nostra home page e cerca il numero del modello per vedere se è disponibile.

Specifiche

Tutti i manuali per Bowers and Wilkins Altoparlanti
Altri manuali di Altoparlanti

Domande frequenti su Bowers and Wilkins DM602.5 S3 Altoparlante

Il nostro team di supporto cerca informazioni utili sul prodotto e risposte alle domande più frequenti. Se trovi un’inesattezza nelle nostre domande frequenti, ti preghiamo di farcelo sapere utilizzando il nostro modulo di contatto.

Prodotti correlati

Manuale

Bowers and Wilkins DM604 S3 Altoparlante

Manuale

Bowers and Wilkins LCR6 S2 Altoparlante

Manuale

Bowers and Wilkins Signature SCM Altoparlante

Manuale

Bowers and Wilkins Signature Diamond Altoparlante

Manuale

Bowers and Wilkins CM6 Altoparlante

Manuale

Bowers and Wilkins DM550 Altoparlante

Manuale

Bowers and Wilkins Nautilus 802 Altoparlante

Manuale

Bowers and Wilkins CWM Cinema 6 Altoparlante

Categorie correlate