Manuale Black and Decker GK430 Motosega

Manuale

2

Chainsaw

Know your machine

Read all of this manual carefully, observing all the

recommended safety instructions before, during and

after using your machine, and maintain your machine

in good working order.

Familiarise yourself with the controls on your machine

before attempting to operate it, but above all, be sure

you know how to stop your machine in an emergency.

Retain this manual and all other literature supplied

with your machine for future reference.

Safety instructions

• Know your chainsaw. Please read the

instruction leaflet carefully and familiarize yourself

with the chainsaw; in particular with regard to the

sawing of round wood.

• Wear close fitting and protective clothing -

including a safety helmet, goggles, safety shoes

and gloves. We recommend rubber gloves and

rubber footwear for outdoor use.

• For all types of cutting. Always hold the saw

firmly with both hands, with thumbs and fingers

encircling the saw handles. Do not release your

finger until the chainsaw has stopped moving.

• Fatigue. Never operate a chainsaw when you

are tired.

• Avoid dangerous environments. Do not

expose your chainsaw to damp and wet

conditions. Keep the work area well lit. Use a

saw horse whenever possible.

• Keep children away. Make sure that other

people - especially children and pets- stay away

from the work area.

• Be sure of your footing and pre-plan a safe exit

from a falling tree or branches.

• Use wedges to help control felling and prevent

binding the guide bar and saw chain in the cut.

• Keep all parts of your body and clothing

away from the saw chain when running the

chainsaw. Before you switch on make sure the

chainsaw is not contacting anything. Do not

touch or try to stop a moving saw chain with

your hand. Be specially careful when using in a

kneeling position.

• Carry your chainsaw carefully with the mains

supply disconnected and with the guide bar and

saw chain to the rear.

• Do not abuse the cable. Never carry a

chainsaw by the cable or jerk it to disconnect the

plug from the socket. Keep the cable away from

heat, oil or sharp edges. Check the cable

frequently for damage.

• Do not operate a chainsaw which is damaged,

improperly adjusted or is not completely and

securely assembled.

• Keep your chainsaw clean. Do not allow dirt,

oil or sawdust to build up on the chainsaw; pay

particular attention to the air inlet and outlet slots.

These must not become clogged. Clean your

chainsaw with a dry cloth, but do not use any

solvents or cleaning fluids.

• Saw chain care. Keep the saw chain sharp and

snug on the guide bar. Ensure the saw chain and

guide bar are clean and well oiled.

• Beware of kickback. Hold the chainsaw firmly

with both hands when the motor is running. Use

a firm grip with thumbs and fingers encircling the

chainsaw handles and watch carefully what you

cut. Kickback (that is when the chainsaw jumps

or jerks up or backward) can be caused by:

• Striking branches or other objects

accidentally with a tip of the saw while the

saw chain is moving.

• Striking metal, cement or any other hard

material near the wood, or buried in

the wood.

• A dull or loose chain.

• Cutting above shoulder height.

• Inattention in holding or guiding the saw

while cutting.

• Overbalancing. Keep proper footing and

balance at all times. Do not overreach.

• We strongly recommend you do not attempt to

operate the chainsaw while in a tree, on a ladder

or on any other unstable surface. If you decide to

do so, be advised that these positions are

extremely dangerous.

• When cutting a branch that is under tension, be

alert for springback so that you will not be struck

when the tension is released.

• Use extreme caution when cutting small size

brush and saplings because slender material

may catch the saw chain and be whipped

toward you, or pull you off balance.

• Switch off before setting the chainsaw down.

The saw chain will continue to run for a short

period after the saw has been switched off.

Instruction Manual

Valutazione

Maggiori informazioni su questo manuale

Comprendiamo che sia bello avere un manuale cartaceo per i tuoi Black and Decker GK430 Motosega. Puoi sempre scaricare il manuale dal nostro sito web e stamparlo tu stesso. Se desideri avere un manuale originale, ti consigliamo di contattare Black and Decker. Potrebbero essere in grado di fornire un manuale originale. Stai cercando il manuale del tuo Black and Decker GK430 Motosega in un'altra lingua? Scegli la tua lingua preferita sulla nostra home page e cerca il numero del modello per vedere se è disponibile.

Specifiche

Tutti i manuali per Black and Decker Motoseghe
Altri manuali di Motoseghe

Domande frequenti su Black and Decker GK430 Motosega

Il nostro team di supporto cerca informazioni utili sul prodotto e risposte alle domande più frequenti. Se trovi un’inesattezza nelle nostre domande frequenti, ti preghiamo di farcelo sapere utilizzando il nostro modulo di contatto.