Manuale Ansmann London Baby monitor

Manuale







Thank you for the purchasing this mobile ANSMANN Radio Baby Monitor

The system is designed for simple, uncomplicated operation. ANSMANN

Babyphones are known for high quality and environmentally friendly

materials.





Both the transmitter and receiver should always be adjusted to the same

coding. The transmitter should have a minimum safety distance of 1m

from the baby.

Using the monitors in the mains will ensure the maximum working

range. The range can vary in the house or in the neighbourhood due

to local conditions (e.g. reinforced concrete floors and walls, trees and

other large structures)

The transmitter is equipped with an automatic voice control. This means

that the transmitter is only activated, if noises are heard (e.g. the crying

of your child). Unnecessary transmitted radio waves are avoided by this

function. The Radio Baby Monitor transmits a non audible pilot signal.

So interference by other radio communication system is prevented to a

large extent.For safety reasons the battery compartments are screwed

closed.







Both transmitter and receiver can be operated with a plug in power

( 11 ) supply, alkaline or rechargeable batteries. The transmitter and

receiver do not include any charging technology, so will not recharge

inserted cells.



Remove the screws from the battery compartments( 3 ) of the

transmitter and receiver. Open battery compartments by pushing the

cover. The channel switch( 4 ) inside must be adjusted to the same

position in both devices.





Move the slide switch from off ( 5 ) to the on position ( 6 ) . The

status indicator (green LED) should now be on. Adjust the microphone

sensitivity with control switch ( 7 ) so that the transmitter reacts and

transmits sound to the receiver depending on the volume of the sound

heard (e.g. baby whimpering or loud crying) When the transmitter is

activated by a noise, the “ RED transmitter indicator lights ( 8 ) for the

duration of the transmission. wSet the sound volume on the receiver

using the volume control ( 9 ). The volume control cannot be set “0” to

avoid an unintentional failure to hear your baby.



Insert 3 x “AAA” Ansmann Alkaline Micro batteries into the battery

compartments, while observing the polarity signs. Receiver; The battery

control LED (10) flashes RED when seeing a weak battery performance.

At this point the batteries are only okay for another 2-3 hours, so should

be changed as soon as possible.



Belt-clips allow the mobility the babyphones.



Frequency 1 = 40.665 MHz | Frequency 2 = 40.695 MHz

Codes: Pilot-Tone

Operating range: 150m (free field)

Operating times: 20-50 hours with batteries

Plug in power pack: DC 9V 150 mA for Transmitter / Receiver

Battery: transmitter/receiver 3 x “AAA” Ansmann Micro Alkaline

Dimension: Transmitter / Receiver: 70 x 114 x 40 ( W x H x D )



No warranty claim will be accepted for the following cases:

> Operating error

> Empty batteries or defective rechargeable batteries

> Wrong coding/ channel selection

> Failure due to other radio installations (e.g. mobile phones)

> Interference

> Mechanical damage due to mishandling

> No proof of purchase receipt to validate claim



Information for use as a monitoring system for vulnerable children or

persons. This system cannot replace personal supervision of a child or

person requiring care, but will only support it. We do not accept any

kind of consequential liability outside that of the legal product warranty

regulations. This applies in particular for medical use of this system for

which it is not intended.



We hereby issue a warranty for a period of 3 years subject to the terms

and conditions listed below. In the event of warranty claim please return

it to the original dealer where you bought the Babyphone along with

your proof of purchase.



1 transmitter, 1 receiver, 2 power supplies, Operating instructions, 6

“AAA“ Ansmann Micro size Alkaline Batteries

Valutazione

Maggiori informazioni su questo manuale

Comprendiamo che sia bello avere un manuale cartaceo per i tuoi Ansmann London Baby monitor. Puoi sempre scaricare il manuale dal nostro sito web e stamparlo tu stesso. Se desideri avere un manuale originale, ti consigliamo di contattare Ansmann. Potrebbero essere in grado di fornire un manuale originale. Stai cercando il manuale del tuo Ansmann London Baby monitor in un'altra lingua? Scegli la tua lingua preferita sulla nostra home page e cerca il numero del modello per vedere se è disponibile.

Specifiche

Tutti i manuali per Ansmann Baby monitor
Altri manuali di Baby monitor

Domande frequenti su Ansmann London Baby monitor

Il nostro team di supporto cerca informazioni utili sul prodotto e risposte alle domande più frequenti. Se trovi un’inesattezza nelle nostre domande frequenti, ti preghiamo di farcelo sapere utilizzando il nostro modulo di contatto.

Prodotti correlati

Manuale

Ansmann Barcelona Baby monitor

Manuale

Lexibook SMBABY1 Baby monitor

Manuale

Vertbaudet 70328-0063 Baby monitor

Manuale

Switel BCF877 Baby monitor

Manuale

Babymoov A014437 YOO Start Baby monitor

Manuale

Babymoov A014435 YOO Master Plus 5 Baby monitor

Manuale

Neonate BC-8000DV Baby monitor

Manuale

Babymoov A014204 Baby monitor

Categorie correlate